Skip to content

tuxBurner/vortex-mixer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Vortex Paint Mixer

This is my OpenSource vortex paint mixer.

You can also find it on thingiverse: https://www.thingiverse.com/thing:3605287

The reason why i created this, is i wanted to have an easy way to shake my paints. I used an adapter on a jig saw, which worked pretty well but was verry noisy to.

I stumpled over the vortex mixer from NDubiel on thingiverse: https://www.thingiverse.com/thing:534894 which was quite good but i wanted to improve some stuff.

Look the video how it works

Vortex Mixer in Action

Contribute

When you found a bug or have enhancement feel free to create a pull request or an issue :)

Software used to create this project

I thank all the people which make it possible to create a project like this with there free software.

Scad files

The case / lid and motorclamp scad file is the scadfiles/case.scad

The top scad file is the scadfiles/top.scad

Howto build the mixer

Tools

  • A 3d printer or use one of the services which print the objects for you
  • Soldering iron
  • Superglue
  • Hotglue gun
  • Optional if you want to create the pcb a mill or edging equipment

Motorcontroller PCB Components

  • 1 x Diode (for example a 4007)
  • 1 x Poti 10K
  • 2 x Capacitor 47uF at 20V or greater
  • 1 x LM317
  • 1 x Heatsink for the LM317 required
  • 1 x 1k Resistor
  • 2 x Screw Terminal (Optional)

Other electronic Components

  • 12V DC Motor
  • Micro Switch
  • 1 x Powerplug (Optional)
  • Poti Knob
  • 12 to 20 volt power supply

General Components

  • 4 x Rubber Foot
  • 1 x M3 * 30 Bolt + 3M Nut for the motor clamp
  • 5 x M3 tapping screws
  • Bearing for the cuppler
  • For the top 4M x 20 Bolt and 2 4M x Nuts

Components to print

For the Mixer Case:

Print the following parts. Each one time.

I used 20% infill and PLA.

For the paint bottle tops

Select the one which yo need.

I used 20% infill and PLA.

Motorcontroller PCB

The schemantics is like this

PCB schemantic

You can either use the pcb which i generated with KICAD. The project files are located in the folder: pcb

If you don't have the possibility to create the pcb you can also freewire the electronics.

Build Instructions

Mixer

Hot glue the micro switch into the case and wire the switch to the power plug.

case_bottom_1.jpg

case_bottom_2.jpg

case_bottom_3.jpg

Put the motorclamp and the motor together

motor.jpg motorclamp_1.jpg motorclamp_2.jpg motorclamp_3.jpg

Assemble the pcb. Don't forget the heatsink :)

pcb.jpg

Wire the wires to the pcb from the powerplug, micro switch and the motor.

motor_wired.jpg

Fix the poti with the nut onto the case.

poti_fixed.jpg

Add the knob to the poti.

poti_knob.jpg

Add the wedge to the motor clamp. Mine broke a little bit when i tokked of the printer. But it is still working.

¯\(ツ)

wedge.jpg

motorclamp_and_wedge.jpg

Screw the motorclamp into the case.

motor_screwed_into_case.jpg

Screw the lid onto the case.

lid_closed.jpg

Superglue the bearing into the coupler.

coupler.jpg

Put the coupler onto the motor.

coupler_attached.jpg

Paint bottle top

Here is a picture of the diffrent tops and the corresponding paint bottles.

tops_and_bottles.jpg

Put a M4 nut into the bottom of the top.

top_1.jpg

Screw a M4 bolt from the other side into the top and put a second M4 nut at the bottom.

top_2.jpg

DONE ! :)

complete.jpg

Just plugin the power and push down the color top into the coupler.

About

Vortex mixer for paints

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published