Visionfive 5.15.y #35
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Collaborator
WalkerChenL
commented
Nov 17, 2021
WalkerChenL
commented
- Support the YT8521 gigabit PHY for Starfive JH7100 SOC.
- Support watchdog for Starfive JH7100 SOC.
commit 7c4fc08 upstream. Some of the code currently used in dw8250_set_termios(), byt_set_termios() may be reused by other methods in the future. Extract it to a common helper function. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Add StarFive Kconfig option to select SoC specific and common drivers required for these SoCs. Select subsystems required to boot so the required drivers gets enabled by default. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]>
Add compatible string for the StarFive JH7100 clint. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]>
Add compatible string for StarFive JH7100 plic. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]>
Add all clock outputs for the StarFive JH7100 clock generator. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Acked-by: Rob Herring <[email protected]>
Add bindings for the clock generator on the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Rob Herring <[email protected]>
Add a driver for the StarFive JH7100 clock generator. Signed-off-by: Geert Uytterhoeven <[email protected]> Co-developed-by: Emil Renner Berthing <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
Add all resets for the StarFive JH7100 reset controller. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Acked-by: Rob Herring <[email protected]>
Add bindings for the reset controller on the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Rob Herring <[email protected]>
Add a driver for the StarFive JH7100 reset controller. Signed-off-by: Emil Renner Berthing <[email protected]>
Add definitons for pins and GPIO input, output and output enable signals on the StarFive JH7100 SoC. Signed-off-by: Emil Renner Berthing <[email protected]> Acked-by: Rob Herring <[email protected]>
Add bindings for the GPIO/pin controller on the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]>
Add a combined pinctrl and GPIO driver for the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC, which is said to feature only minor changes to these pinctrl/GPIO parts. For each "GPIO" there are two registers for configuring the output and output enable signals which may come from other peripherals. Among these are two special signals that are constant 0 and constant 1 respectively. Controlling the GPIOs from software is done by choosing one of these signals. In other words the same registers are used for both pin muxing and controlling the GPIOs, which makes it easier to combine the pinctrl and GPIO driver in one. I wrote the pinconf and pinmux parts, but the GPIO part of the code is based on the GPIO driver in the vendor tree written by Huan Feng with cleanups and fixes by Drew and me. Datasheet: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf Co-developed-by: Huan Feng <[email protected]> Signed-off-by: Huan Feng <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Co-developed-by: Drew Fustini <[email protected]> Signed-off-by: Drew Fustini <[email protected]>
Add compatibles for the StarFive JH7100 uarts. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]>
On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to exactly 16 * 115200Hz and many other common bitrates. Trying this will only result in a higher input clock, but low enough that the UART's internal divisor can't come close enough to the baud rate target. So rather than try to set the input clock it's better to skip the clk_set_rate call and rely solely on the UART's internal divisor. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]>
Add initial device tree for the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC. The CPU and cache data is based on the device tree in the vendor u-boot port. Signed-off-by: Emil Renner Berthing <[email protected]>
Add initial device tree for the BeagleV Starlight Beta board. About 300 of these boards were sent out as part of a now cancelled BeagleBoard.org project. I2C timing data is based on the device tree in the vendor u-boot port. Heartbeat LED added by Geert. Signed-off-by: Emil Renner Berthing <[email protected]> Co-developed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
Introduce ARCH_DMA_MINALIGN to riscv arch. Signed-off-by: Xianting Tian <[email protected]>
Write a C version of memcpy() which uses the biggest data size allowed, without generating unaligned accesses. The procedure is made of three steps: First copy data one byte at time until the destination buffer is aligned to a long boundary. Then copy the data one long at time shifting the current and the next u8 to compose a long at every cycle. Finally, copy the remainder one byte at time. On a BeagleV, the TCP RX throughput increased by 45%: before: $ iperf3 -c beaglev Connecting to host beaglev, port 5201 [ 5] local 192.168.85.6 port 44840 connected to 192.168.85.48 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 76.4 MBytes 641 Mbits/sec 27 624 KBytes [ 5] 1.00-2.00 sec 72.5 MBytes 608 Mbits/sec 0 708 KBytes [ 5] 2.00-3.00 sec 73.8 MBytes 619 Mbits/sec 10 451 KBytes [ 5] 3.00-4.00 sec 72.5 MBytes 608 Mbits/sec 0 564 KBytes [ 5] 4.00-5.00 sec 73.8 MBytes 619 Mbits/sec 0 658 KBytes [ 5] 5.00-6.00 sec 73.8 MBytes 619 Mbits/sec 14 522 KBytes [ 5] 6.00-7.00 sec 73.8 MBytes 619 Mbits/sec 0 621 KBytes [ 5] 7.00-8.00 sec 72.5 MBytes 608 Mbits/sec 0 706 KBytes [ 5] 8.00-9.00 sec 73.8 MBytes 619 Mbits/sec 20 580 KBytes [ 5] 9.00-10.00 sec 73.8 MBytes 619 Mbits/sec 0 672 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 736 MBytes 618 Mbits/sec 71 sender [ 5] 0.00-10.01 sec 733 MBytes 615 Mbits/sec receiver after: $ iperf3 -c beaglev Connecting to host beaglev, port 5201 [ 5] local 192.168.85.6 port 44864 connected to 192.168.85.48 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 109 MBytes 912 Mbits/sec 48 559 KBytes [ 5] 1.00-2.00 sec 108 MBytes 902 Mbits/sec 0 690 KBytes [ 5] 2.00-3.00 sec 106 MBytes 891 Mbits/sec 36 396 KBytes [ 5] 3.00-4.00 sec 108 MBytes 902 Mbits/sec 0 567 KBytes [ 5] 4.00-5.00 sec 106 MBytes 891 Mbits/sec 0 699 KBytes [ 5] 5.00-6.00 sec 106 MBytes 891 Mbits/sec 32 414 KBytes [ 5] 6.00-7.00 sec 106 MBytes 891 Mbits/sec 0 583 KBytes [ 5] 7.00-8.00 sec 106 MBytes 891 Mbits/sec 0 708 KBytes [ 5] 8.00-9.00 sec 106 MBytes 891 Mbits/sec 28 433 KBytes [ 5] 9.00-10.00 sec 108 MBytes 902 Mbits/sec 0 591 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.04 GBytes 897 Mbits/sec 144 sender [ 5] 0.00-10.01 sec 1.04 GBytes 894 Mbits/sec receiver And the decreased CPU time of the memcpy() is observable with perf top. This is the `perf top -Ue task-clock` output when doing the test: before: Overhead Shared O Symbol 42.22% [kernel] [k] memcpy 35.00% [kernel] [k] __asm_copy_to_user 3.50% [kernel] [k] sifive_l2_flush64_range 2.30% [kernel] [k] stmmac_napi_poll_rx 1.11% [kernel] [k] memset after: Overhead Shared O Symbol 45.69% [kernel] [k] __asm_copy_to_user 29.06% [kernel] [k] memcpy 4.09% [kernel] [k] sifive_l2_flush64_range 2.77% [kernel] [k] stmmac_napi_poll_rx 1.24% [kernel] [k] memset Signed-off-by: Matteo Croce <[email protected]> Reported-by: kernel test robot <[email protected]>
When the destination buffer is before the source one, or when the buffers doesn't overlap, it's safe to use memcpy() instead, which is optimized to use a bigger data size possible. Signed-off-by: Matteo Croce <[email protected]> Reported-by: kernel test robot <[email protected]>
The generic memset is defined as a byte at time write. This is always safe, but it's slower than a 4 byte or even 8 byte write. Write a generic memset which fills the data one byte at time until the destination is aligned, then fills using the largest size allowed, and finally fills the remaining data one byte at time. Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
Current u-boot doesn't seem to take into account that some GPIOs are configured as inputs/outputs of certain peripherals on power-up. This means it ends up configuring some GPIOs as inputs to more than one peripheral which the documentation explicitly says is illegal. Similarly it also ends up configuring more than one GPIO as output of the same peripheral. While not explicitly mentioned by the documentation this also seems like a bad idea. The easiest way to remedy this mess is to just disconnect all GPIOs from peripherals and have our pinmux configuration set everything up properly. This, however, means that we'd disconnect the serial console from its pins for a while, so add a device tree property to keep certain GPIOs from being reset. Signed-off-by: Emil Renner Berthing <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
Add bindings for the temperature sensor on the StarFive JH7100 SoC. Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Rob Herring <[email protected]>
Register definitions and conversion constants based on sfctemp driver by Samin in the StarFive 5.10 kernel. Signed-off-by: Emil Renner Berthing <[email protected]> Signed-off-by: Samin Guo <[email protected]>
The first DMAC instance in the StarFive JH7100 SoC supports 16 DMA
channels.
FIXME Given there are more changes to the driver than just increasing
DMAC_MAX_CHANNELS, we probably need a new compatible value, too.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Samin Guo <[email protected]>
Signed-off-by: Michael Yan <[email protected]> Signed-off-by: Jenny Zhang <[email protected]> Signed-off-by: Walker Chen <[email protected]>
Signed-off-by: Walker Chen <[email protected]>
Signed-off-by: Walker Chen <[email protected]>
WalkerChenL
force-pushed
the
visionfive-5.15.y
branch
from
fc301d5
to
ba70ac3
Compare
|
Esmil, thank you so much for your kind tips! I have fixed the commit messages with your help and push to my branch. Because I am a newbie with code management using GIT, this is my first commit, please forgive my mistake. |
esmil
force-pushed
the
visionfive-5.15.y
branch
from
b82aa99
to
84f9758
Compare
|
@WalkerChenL No problem at all. Thanks for fixing the Signed-off-bys. I've now cherry-picked the watchdog and YT8521 code to both the visionfive and visionfive-5.15.y branches. In the future it would be great if you could also set your author name to the same as the Signed-off-bys. Eg. The patches for the reset and clock drivers needs to be rebased on the latest version. Right now most of the commit is just rolling back the drivers to an earlier version. I know these driver have been changing a lot recently in response to review from upstream, but now it seems there is finally census, so now should be a good time to rebase your changes properly. I also haven't merged the audio code yet, since it seems to depend on the clock and reset changes. I'll play a bit more with the pwmdac code in the coming days to see if I can get it to play something. |
esmil
force-pushed
the
visionfive-5.15.y
branch
2 times, most recently
from
e575c51
to
e514573
Compare
esmil
force-pushed
the
visionfive-5.15.y
branch
2 times, most recently
from
1d6615a
to
7300952
Compare
esmil
force-pushed
the
visionfive-5.15.y
branch
2 times, most recently
from
4604859
to
71a11d1
Compare
esmil
force-pushed
the
visionfive-5.15.y
branch
2 times, most recently
from
31ddcde
to
e198e99
Compare
esmil
force-pushed
the
visionfive-5.15.y
branch
2 times, most recently
from
988ab4f
to
8cd2980
Compare
esmil
pushed a commit
that referenced
this pull request
Jan 27, 2022
…ncurrent video sessions [ Upstream commit 91f2b7d ] In existing implementation, core_clk_setrate() is getting called concurrently in concurrent video sessions. Before the previous call to core_clk_setrate returns, new call to core_clk_setrate is invoked from another video session running concurrently. This results in latest calculated frequency being set (higher/lower) instead of actual frequency required for that video session. It also results in stability crashes mention below. These resources are specific to video core, hence keeping under core lock would ensure that they are estimated for all running video sessions and called once for the video core. Crash logs: [ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48 [ 1.908493] Modules linked in: [ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c [ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) [ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--) [ 1.934608] pc : opp_debug_remove_one+0x2c/0x48 [ 1.939080] lr : opp_debug_remove_one+0x2c/0x48 [ 1.943560] sp : ffffffc011d7b7f0 [ 1.946836] pmr_save: 000000e0 [ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc [ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00 [ 1.960355] x25: 0000000000000001 x24: 0000000000000000 [ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900 [ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800 [ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10 [ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec [ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003 [ 1.991849] x13: 0000000000000004 x12: 0000000000000001 [ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff [ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00 [ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00 [ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000 [ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480 [ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017 [ 2.028594] Call trace: [ 2.031022] opp_debug_remove_one+0x2c/0x48 [ 2.035160] dev_pm_opp_put+0x94/0xb0 [ 2.038780] _opp_remove_all+0x7c/0xc8 [ 2.042486] _opp_remove_all_static+0x54/0x7c [ 2.046796] dev_pm_opp_remove_table+0x74/0x98 [ 2.051183] devm_pm_opp_of_table_release+0x18/0x24 [ 2.056001] devm_action_release+0x1c/0x28 [ 2.060053] release_nodes+0x23c/0x2b8 [ 2.063760] devres_release_group+0xcc/0xd0 [ 2.067900] component_bind+0xac/0x168 [ 2.071608] component_bind_all+0x98/0x124 [ 2.075664] msm_drm_bind+0x1e8/0x678 [ 2.079287] try_to_bring_up_master+0x60/0x134 [ 2.083674] component_master_add_with_match+0xd8/0x120 [ 2.088834] msm_pdev_probe+0x20c/0x2a0 [ 2.092629] platform_drv_probe+0x9c/0xbc [ 2.096598] really_probe+0x11c/0x46c [ 2.100217] driver_probe_device+0x8c/0xf0 [ 2.104270] device_driver_attach+0x54/0x78 [ 2.108407] __driver_attach+0x48/0x148 [ 2.112201] bus_for_each_dev+0x88/0xd4 [ 2.115998] driver_attach+0x2c/0x38 [ 2.119534] bus_add_driver+0x10c/0x200 [ 2.123330] driver_register+0x6c/0x104 [ 2.127122] __platform_driver_register+0x4c/0x58 [ 2.131767] msm_drm_register+0x6c/0x70 [ 2.135560] do_one_initcall+0x64/0x23c [ 2.139357] do_initcall_level+0xac/0x15c [ 2.143321] do_initcalls+0x5c/0x9c [ 2.146778] do_basic_setup+0x2c/0x38 [ 2.150401] kernel_init_freeable+0xf8/0x15c [ 2.154622] kernel_init+0x1c/0x11c [ 2.158079] ret_from_fork+0x10/0x30 [ 2.161615] ---[ end trace a2cc45a0f784b212 ]--- [ 2.166272] Removing OPP: 300000000 Signed-off-by: Mansur Alisha Shaik <[email protected]> Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 7, 2022
After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 27, 2022
[ Upstream commit f2703de ] After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
MichaIng
pushed a commit
to MichaIng/linux
that referenced
this pull request
Jul 29, 2023
[ Upstream commit 2aaa8a1 ] With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0)) For such a packet, we call ip6_route_input() to look up a route for the next destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv() If no route is found, ip6_null_entry is set to skb, and the following dst_input(skb) calls ip6_pkt_drop(). Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev as the input device is the loopback interface. Then, we have to check if skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref for ip6_null_entry. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c starfive-tech#35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f9dc751baea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffe98712c38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffe98712cf8 RCX: 00007f9dc751baea RDX: 0000000000000060 RSI: 00007f9dc6460b90 RDI: 0000000000000003 RBP: 00007f9dc56e8be0 R08: 00007ffe98712d70 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f9dc6af5d1b </TASK> Modules linked in: CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled Fixes: 4832c30 ("net: ipv6: put host and anycast routes on device with address") Reported-by: Wang Yufen <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Fishwaldo
pushed a commit
to Fishwaldo/Star64_linux
that referenced
this pull request
Aug 20, 2023
[ Upstream commit 2aaa8a1 ] With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0)) For such a packet, we call ip6_route_input() to look up a route for the next destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv() If no route is found, ip6_null_entry is set to skb, and the following dst_input(skb) calls ip6_pkt_drop(). Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev as the input device is the loopback interface. Then, we have to check if skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref for ip6_null_entry. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c starfive-tech#35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f9dc751baea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffe98712c38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffe98712cf8 RCX: 00007f9dc751baea RDX: 0000000000000060 RSI: 00007f9dc6460b90 RDI: 0000000000000003 RBP: 00007f9dc56e8be0 R08: 00007ffe98712d70 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f9dc6af5d1b </TASK> Modules linked in: CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled Fixes: 4832c30 ("net: ipv6: put host and anycast routes on device with address") Reported-by: Wang Yufen <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 11, 2023
We should pass a pointer to global_hook to the get_proto_defrag_hook() instead of its value, since the passed value won't be updated even if the request module was loaded successfully. Log: [ 54.915713] nf_defrag_ipv4 has bad registration [ 54.915779] WARNING: CPU: 3 PID: 6323 at net/netfilter/nf_bpf_link.c:62 get_proto_defrag_hook+0x137/0x160 [ 54.915835] CPU: 3 PID: 6323 Comm: fentry Kdump: loaded Tainted: G E 6.7.0-rc2+ #35 [ 54.915839] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 54.915841] RIP: 0010:get_proto_defrag_hook+0x137/0x160 [ 54.915844] Code: 4f 8c e8 2c cf 68 ff 80 3d db 83 9a 01 00 0f 85 74 ff ff ff 48 89 ee 48 c7 c7 8f 12 4f 8c c6 05 c4 83 9a 01 01 e8 09 ee 5f ff <0f> 0b e9 57 ff ff ff 49 8b 3c 24 4c 63 e5 e8 36 28 6c ff 4c 89 e0 [ 54.915849] RSP: 0018:ffffb676003fbdb0 EFLAGS: 00010286 [ 54.915852] RAX: 0000000000000023 RBX: ffff9596503d5600 RCX: ffff95996fce08c8 [ 54.915854] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff95996fce08c0 [ 54.915855] RBP: ffffffff8c4f12de R08: 0000000000000000 R09: 00000000fffeffff [ 54.915859] R10: ffffb676003fbc70 R11: ffffffff8d363ae8 R12: 0000000000000000 [ 54.915861] R13: ffffffff8e1f75c0 R14: ffffb676003c9000 R15: 00007ffd15e78ef0 [ 54.915864] FS: 00007fb6e9cab740(0000) GS:ffff95996fcc0000(0000) knlGS:0000000000000000 [ 54.915867] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.915868] CR2: 00007ffd15e75c40 CR3: 0000000101e62006 CR4: 0000000000360ef0 [ 54.915870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 54.915871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 54.915873] Call Trace: [ 54.915891] <TASK> [ 54.915894] ? __warn+0x84/0x140 [ 54.915905] ? get_proto_defrag_hook+0x137/0x160 [ 54.915908] ? __report_bug+0xea/0x100 [ 54.915925] ? report_bug+0x2b/0x80 [ 54.915928] ? handle_bug+0x3c/0x70 [ 54.915939] ? exc_invalid_op+0x18/0x70 [ 54.915942] ? asm_exc_invalid_op+0x1a/0x20 [ 54.915948] ? get_proto_defrag_hook+0x137/0x160 [ 54.915950] bpf_nf_link_attach+0x1eb/0x240 [ 54.915953] link_create+0x173/0x290 [ 54.915969] __sys_bpf+0x588/0x8f0 [ 54.915974] __x64_sys_bpf+0x20/0x30 [ 54.915977] do_syscall_64+0x45/0xf0 [ 54.915989] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 54.915998] RIP: 0033:0x7fb6e9daa51d [ 54.916001] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2b 89 0c 00 f7 d8 64 89 01 48 [ 54.916003] RSP: 002b:00007ffd15e78ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ 54.916006] RAX: ffffffffffffffda RBX: 00007ffd15e78fc0 RCX: 00007fb6e9daa51d [ 54.916007] RDX: 0000000000000040 RSI: 00007ffd15e78ef0 RDI: 000000000000001c [ 54.916009] RBP: 000000000000002d R08: 00007fb6e9e73a60 R09: 0000000000000001 [ 54.916010] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000006 [ 54.916012] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 54.916014] </TASK> [ 54.916015] ---[ end trace 0000000000000000 ]--- Fixes: 91721c2 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link") Signed-off-by: D. Wythe <[email protected]> Acked-by: Daniel Xu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 11, 2023
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 11, 2023
The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
MichaIng
pushed a commit
to MichaIng/linux
that referenced
this pull request
Dec 15, 2023
[ Upstream commit fe57575 ] The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 starfive-tech#35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec starfive-tech#48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 starfive-tech#48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) starfive-tech#48/3 cgrp_local_storage/recursion:FAIL starfive-tech#48/4 cgrp_local_storage/negative:OK starfive-tech#48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) starfive-tech#48/6 cgrp_local_storage/yes_rcu_lock:FAIL starfive-tech#48/7 cgrp_local_storage/no_rcu_lock:OK starfive-tech#48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 starfive-tech#48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) starfive-tech#48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) starfive-tech#48/6 cgrp_local_storage/yes_rcu_lock:FAIL starfive-tech#48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
MichaIng
pushed a commit
to MichaIng/linux
that referenced
this pull request
Dec 15, 2023
[ Upstream commit 5d47ec2 ] The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 starfive-tech#35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. starfive-tech#51/1 cls_redirect/cls_redirect_inlined:OK starfive-tech#51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK starfive-tech#51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK starfive-tech#51/16 cls_redirect/cls_redirect_subprogs:OK starfive-tech#51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK starfive-tech#51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK starfive-tech#51/31 cls_redirect/cls_redirect_dynptr:OK starfive-tech#51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK starfive-tech#51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK starfive-tech#51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK starfive-tech#51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK starfive-tech#51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK starfive-tech#51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK starfive-tech#51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK starfive-tech#51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK starfive-tech#51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()
The btmon log below shows the case that lacks enc key size check.
> HCI Event: Connect Request (0x04) plen 10
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Class: 0x480104
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Desktop workstation
Capturing (Scanner, Microphone)
Telephony (Cordless telephony, Modem, Headset)
Link type: ACL (0x01)
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Role: Peripheral (0x01)
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) ncmd 2
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 1
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
...
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 2
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Key size: 6
// We should check the enc key size
...
> ACL Data RX: Handle 1 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 3 len 4
PSM: 25 (0x0019)
Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection pending (0x0001)
Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Count: 1
#35: len 16 (25 Kb/s)
Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
Cc: [email protected]
Signed-off-by: Alex Lu <[email protected]>
Signed-off-by: Max Chou <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
MichaIng
pushed a commit
to MichaIng/linux
that referenced
this pull request
Jan 7, 2024
commit 04a342c upstream. When we are slave role and receives l2cap conn req when encryption has started, we should check the enc key size to avoid KNOB attack or BLUFFS attack. From SIG recommendation, implementations are advised to reject service-level connections on an encrypted baseband link with key strengths below 7 octets. A simple and clear way to achieve this is to place the enc key size check in hci_cc_read_enc_key_size() The btmon log below shows the case that lacks enc key size check. > HCI Event: Connect Request (0x04) plen 10 Address: BB:22:33:44:55:99 (OUI BB-22-33) Class: 0x480104 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Desktop workstation Capturing (Scanner, Microphone) Telephony (Cordless telephony, Modem, Headset) Link type: ACL (0x01) < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 Address: BB:22:33:44:55:99 (OUI BB-22-33) Role: Peripheral (0x01) > HCI Event: Command Status (0x0f) plen 4 Accept Connection Request (0x01|0x0009) ncmd 2 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Link type: ACL (0x01) Encryption: Disabled (0x00) ... > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Encryption: Enabled with E0 (0x01) < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 2 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Key size: 6 // We should check the enc key size ... > ACL Data RX: Handle 1 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 3 len 4 PSM: 25 (0x0019) Source CID: 64 < ACL Data TX: Handle 1 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 3 len 8 Destination CID: 64 Source CID: 64 Result: Connection pending (0x0001) Status: Authorization pending (0x0002) > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Count: 1 starfive-tech#35: len 16 (25 Kb/s) Latency: 5 msec (2-7 msec ~4 msec) < ACL Data TX: Handle 1 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 3 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) Cc: [email protected] Signed-off-by: Alex Lu <[email protected]> Signed-off-by: Max Chou <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.