v4.2.5

- (Add) CTB: Support for version 5, and set it as default version
- (Improvement) Encrypted CTB: Better verification of checksum hash (Fixes #845)
- (Improvement) PrusaSlicer printers that use CTB format now all strict set file version under printer notes (Please update your printers)
- (Improvement) Free unused RAM now also collects the LOH
- (Upgrade) AvaloniaUI from 11.0.7 to 11.0.10

CHANGELOG.md

@@ -1,5 +1,13 @@
 # Changelog
 
+## 14/03/2024 - v4.2.5
+
+- (Add) CTB: Support for version 5, and set it as default version
+- (Improvement) Encrypted CTB: Better verification of checksum hash (Fixes #845)
+- (Improvement) PrusaSlicer printers that use CTB format now all strict set file version under printer notes (Please update your printers)
+- (Improvement) Free unused RAM now also collects the LOH
+- (Upgrade) AvaloniaUI from 11.0.7 to 11.0.10
+
 ## 02/03/2024 - v4.2.4
 
 - **Setting - MaxDegreeOfParallelism:**

Directory.Build.props

@@ -29,7 +29,7 @@
         <!-- Enable Build Acceleration in Visual Studio. -->
         <AccelerateBuildsInVisualStudio>true</AccelerateBuildsInVisualStudio>
 
-        <UVtoolsVersion>4.2.4</UVtoolsVersion>
+        <UVtoolsVersion>4.2.5</UVtoolsVersion>
         <AvaloniaVersion>11.0.7</AvaloniaVersion>
     </PropertyGroup>
 

PrusaSlicer/printer/AnyCubic Photon.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-05 at 22:00:17 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:54:48 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON\nFILEFORMAT_PHOTON\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON\nFILEFORMAT_PHOTON\nFILEVERSION_2\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/Creality LD-002H.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:39:43 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:47:37 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_002H\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_50\nLiftSpeed_50\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_002H\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_50\nLiftSpeed_50\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/Creality LD-002R.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:39:38 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:47:41 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_002R\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_002R\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/Creality LD-006.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:39:33 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:47:47 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_006\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_70\nLiftSpeed_70\nRetractSpeed_80\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD_006\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_70\nLiftSpeed_70\nRetractSpeed_80\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/EPAX E10 Mono.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:54 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:48:58 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_E10_Mono\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_E10_Mono\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/EPAX E6 Mono.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:51 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:49:01 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_E6_Mono\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_E6_Mono\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/EPAX X1.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:47 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:49:04 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X1\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X1\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/EPAX X10 4K Mono.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:39 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:49:15 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X10_4KMONO\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X10_4KMONO\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG

PrusaSlicer/printer/EPAX X10.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:43 UTC
+# generated by PrusaSlicer 2.7.2+win64 on 2024-03-12 at 18:49:12 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,13 +27,18 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X10\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X10\nFILEFORMAT_CTB\nFILEVERSION_3\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_7\nLiftHeight_7\nBottomLiftSpeed_40\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_output_precision = 0.001
 slow_tilt_time = 8
-thumbnails = 400x300,200x125
+thumbnails = 400x300/PNG, 200x125/PNG