Skip to content

panubo/docker-postfix

Repository files navigation

Postfix Docker Image

Postfix SMTP Relay based on Debian Bullseye.

Highly configurable Docker image for SMTP relaying. Use wherever a connected service requires SMTP sending capabilities. Supports TLS out of the box and DKIM (if enabled and configured).

Not intended to be used for receiving email for local delivery or end-user email access.

This image is available on quay.io quay.io/panubo/postfix and AWS ECR Public public.ecr.aws/panubo/postfix.

Environment Variables

  • MAILNAME - set this to a legitimate FQDN hostname for this service (required). (example, mail.example.com)
  • MYNETWORKS - comma separated list of IP subnets that are allowed to relay. Default 127.0.0.0/8, 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16
  • LOGOUTPUT - Log file location. eg /var/log/maillog. Default /dev/stdout. See Logging
  • TZ - set timezone. This is used by Postfix to create Received headers. Default UTC.
  • POSTFIX_EXPORTER_ENABLED - enable the Prometheus postfix_exporter. Default false. See Postfix Exporter

General Postfix:

  • SIZELIMIT - Postfix message_size_limit. Default 15728640.
  • POSTFIX_ADD_MISSING_HEADERS - add missing headers. Default no. (options, yes, no)
  • INET_PROTOCOLS - IP protocols, eg ipv4 or ipv6. Default all. (options, ipv4, ipv6, all)
  • BOUNCE_ADDRESS - Email address to receive delivery failure notifications. Default is to log the delivery failure.
  • HEADER_CHECKS - If true activates a set of pre-configured header_checks. (options, true, false)
  • DISABLE_VRFY_COMMAND - Prevents some email address harvesting techniques. Default yes. (options, yes, no)

Rate limiting parameters:

These are common parameters to rate limit outbound mail:

  • SMTP_DESTINATION_CONCURRENCY_LIMIT - Number of concurrent connections per receiving domain.
  • SMTP_DESTINATION_RATE_DELAY - Additional delay (eg 5s) between messages to the same receiving domain.
  • SMTP_EXTRA_RECIPIENT_LIMIT - Limit the number of recipients of each message sent to the receiving domain.

Relay host parameters:

  • RELAYHOST - Postfix relay host. Default ''. (example mail.example.com:25, or [email-smtp.us-west-2.amazonaws.com]:587). N.B. Use square brackets to prevent MX lookup on relay hostname.
  • RELAYHOST_AUTH - Enable authentication for relay host. Generally used with RELAYHOST_PASSWORDMAP. Default no. (options, yes, no).
  • RELAYHOST_PASSWORDMAP - Relay host password map in format: RELAYHOST_PASSWORDMAP=[mail1.example.com]:587:user1:pass1,mail2.example.com:user2:pass2,user3:pass3.
  • RELAYHOST_MAP - Sender dependent relayhost map in format: [email protected]:smtp.example.com:587,@domain2.com:[smtp.example.com]:587
  • SENDER_DEPENDENT_RELAYHOST_AUTH - Enable sender dependent authentication for relay host. Generally used with RELAYHOST_MAP and RELAYHOST_PASSWORDMAP. Default no. (options, yes, no).

Client authentication parameters:

Client authentication is used to authenticate relay clients. Client authentication can be used in conjunction with, or as an alternative to MYNETWORKS.

  • SMTPD_USERS - SMTPD Users user1:password1,user2:password2

TLS parameters:

  • USE_TLS - Enable TLS. Default yes (options, yes, no)

  • TLS_SECURITY_LEVEL - Default may (opportunistic). (options, may, encrypt, others see: www.postfix.org/postconf.5.html#smtp_tls_security_level)

  • TLS_KEY - Default /etc/ssl/private/ssl-cert-snakeoil.key

  • TLS_CRT - Default /etc/ssl/certs/ssl-cert-snakeoil.pem

  • TLS_CA - Default ''

  • CLIENT_TLS_SECURITY_LEVEL - Default may same as TLS_SECURITY_LEVEL but for client TLS

  • CLIENT_TLS_KEY - Default /etc/ssl/private/ssl-cert-snakeoil.key

  • CLIENT_TLS_CRT - Default /etc/ssl/certs/ssl-cert-snakeoil.pem

  • CLIENT_TLS_CA - Default ''

NB. A self-signed ("snake-oil") certificate will be generated on start if required.

DKIM parameters:

  • USE_DKIM - Enable DKIM. Default no (options, yes, no)
  • DKIM_KEYFILE - DKIM Keyfile location. Default /etc/opendkim/dkim.key
  • DKIM_DOMAINS - Domains to sign. Defaults to MAILNAME. Multiple domains will use the same key and selector.
  • DKIM_SELECTOR - DKIM key selector. Default mail. <selector>._domainkey.<domain> is used for resolving the public key in DNS.
  • DKIM_INTERNALHOSTS - Defaults to MYNETWORKS.
  • DKIM_EXTERNALIGNORE - Defaults to MYNETWORKS.
  • DKIM_OVERSIGN_HEADERS - Sets OversignHeaders. Default From.
  • DKIM_SENDER_HEADERS - Sets SenderHeaders. Default unset.
  • DKIM_SIGN_HEADERS - Sets SignHeaders. Default unset.
  • DKIM_OMIT_HEADERS - Sets OmitHeaders. Default unset.

Advanced Postfix parameters:

In some cases it might be necessary to further customise Postfix parameters that are not explicitly exposed via environment variables. In this case the environment variable POSTCONF provides a hook that is directly passed to postconf -e after splitting it by ;. N.B. this is different from existing usage of other multi-value options that use a comma.

Example usage:

POSTCONF=masquerade_domains=foo.example.com example.com;masquerade_exceptions=root,mailer-daemon

Would result in masquerade_domains and masquerade_exceptions being configured for Postfix.

Config Reloader

The config reloader watches the known TLS cert and keys (TLS_CRT, TLS_KEY etc) for changes (mv or updated Kubernetes secret) then reloads Postfix.

  • CONFIG_RELOADER_ENABLED - Enable the config reloader. Default false, must be set to true to enable.

Postfix Prometheus Exporter

This image comes with kumina/postfix_exporter pre-installed. To enable set the environment variable POSTFIX_EXPORTER_ENABLED=true (this must be exactly "true"). The exporter requires that the logoutput is /dev/stdout it can't be anything else.

The exporter listens on port 9154/tcp.

See Logging

Logging

This container outputs the Postfix mail log to stdout by default, additionally logs are saved to /var/log/s6-maillog/current which is rotated every 10MB with only 3 log files retained.

If you want to output somewhere else you can set environment variable LOGOUTPUT. For example LOGOUTPUT=/var/log/maillog.

When enabled OpenDKIM only supports syslog output, the syslogd daemon is only used for OpenDKIM. Only /dev/stdout is supported for OpenDKIM syslog logs.

Note: the Postfix Prometheus exporter only works when the logs are left at /dev/stdout. This requirement of logs going to /dev/stdout is due to the containers logging structure. This may be improved but was needed to keep with backwards compatibility without adding additional variables to configured

Note: The log /var/log/s6-maillog/current is always created but won't actually contain any logs if LOGOUTPUT is not /dev/stdout.

Custom Scripts

Executable shell scripts and binaries can be mounted or copied in to /etc/entrypoint.d. These will be run when the container is launched but before postfix is started. These can be used to customise the behaviour of the container.

Usage Example

Simple example:

docker run -e MAILNAME=mail.example.com quay.io/panubo/postfix:latest

Usage with SendGrid:

docker run --rm -t -i \
  --name smtp \
  -v $(pwd)/spool:/var/spool/postfix:rw \
  -e MAILNAME=mail1.example.com \
  -e RELAYHOST_AUTH='yes' \
  -e RELAYHOST='[smtp.sendgrid.net]:587' \
  -e RELAYHOST_PASSWORDMAP="[smtp.sendgrid.net]:587:apikey:<apikey goes here>" \
  quay.io/panubo/postfix:latest

Volumes

No volumes are defined. If you want persistent spool storage then mount /var/spool/postfix outside of the container.

Ports

Ports 25, 587 and 2525 are enabled.

Test email

To send a test email via the command line, make sure heirloom-mailx (aka bsd-mailx) is installed.

echo -e "To: Bob <[email protected]>\nFrom: Bill <[email protected]>\nSubject: Test email\n\nThis is a test email message" | mailx -v -S smtp=smtp://... -S [email protected] -t

# With TLS
echo -e "To: Bob <[email protected]>\nFrom: Bill <[email protected]>\nSubject: Test email\n\nThis is a test email message" | mailx -v -S smtp-use-starttls -S ssl-verify=ignore -S smtp=smtp://... -S [email protected] -t

# With TLS on Centos/Fedora (extra nss-config-dir)
echo -e "To: Bob <[email protected]>\nFrom: Bill <[email protected]>\nSubject: Test email\n\nThis is a test email message" | mailx -v -S smtp-use-starttls -S ssl-verify=ignore -S nss-config-dir=/etc/pki/nssdb -S smtp=smtp://... -S [email protected] -t

Developing

See the Makefile for make targets.

Releases

For production usage, please use a versioned release rather than the floating 'latest' tag.

See the releases for tag usage and release notes.

Status

Production ready and stable.