Skip to content

Commit

Permalink
split FrontPanelEmbedmentDepth to top/bot | set ATS3B
Browse files Browse the repository at this point in the history
  • Loading branch information
@ok1hra
ok1hra committed Jan 12, 2023
1 parent d86ff20 commit 4c351e8
Showing 1 changed file with 22 additions and 21 deletions.
43 changes: 22 additions & 21 deletions rugged-box.scad
View file
Original file line number Diff line number Diff line change
Expand Up @@ -19,15 +19,15 @@
----------------- Input parameter ---------------------------------*/

// inner sizes in mm
width = 160; // inner size mm
depth = 105; // inner size mm
width = 116.4; // inner size mm
depth = 88.4; // inner size mm
thickness = 3.5; // box thickness mm

// top part
heightTOP = 4*thickness; // must be bigger than 4 x thickness variable
heightTOP = 22+8+27; // must be bigger than 4 x thickness variable

// bottom part
heightBOT = 38; // must be bigget than 7 x thickness variable
heightBOT = 22; // must be bigget than 7 x thickness variable

boltLength = 30; // length your bolt M3
widthCLIP = boltLength/2-0.6; // calculate by boltLength, do not change
Expand All @@ -39,24 +39,25 @@ diameterCLIP = 3; // must be smaller than thickness variable
// for clips on both sides
disableHINGE = 0; // [0:1] by your prefer

enableTOPinside = 0; // [0:1] customize inside
enableTOPinside = 1; // [0:1] customize inside
enableBOTinside = 1; // [0:1] customize inside

arangeForPrint = 0; // [0:1] for render to print must be 1
DXFexport = 0; // [0:1] for .DXF export panel only
openingAngle = 90+30; // [0:220] for preview only
openingAngle = 120; // [0:220] for preview only

//-------------------------------------------------------------------

FrontPanelEmbedmentDepth = 3;
FrontPanelEmbedmentDepthTop = 8+27;
FrontPanelEmbedmentDepthBot = 2;
FrontPanelScrewDia = 3;

module TOPinside(){
fourSupport(FrontPanelScrewDia,heightTOP-FrontPanelEmbedmentDepth); // screw dia, height
fourSupport(FrontPanelScrewDia,heightTOP-FrontPanelEmbedmentDepthTop); // screw dia, height
}

module BOTinside(){
fourSupport(FrontPanelScrewDia,heightBOT-FrontPanelEmbedmentDepth); // screw dia, height
fourSupport(FrontPanelScrewDia,heightBOT-FrontPanelEmbedmentDepthBot); // screw dia, height
}

//-------------------------------------------------------------------
Expand All @@ -65,13 +66,13 @@ if(arangeForPrint==1){

if(DXFexport==1&&enableBOTinside==1){
// panel
projection(cut=true) translate([0,0,-FrontPanelEmbedmentDepth/2])
projection(cut=true) translate([0,0,-FrontPanelEmbedmentDepthBot/2])
difference(){
layer(width,depth,thickness*4-0.4, thickness*4-0.4, FrontPanelEmbedmentDepth, thickness);
translate([width/2-2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([width/2-2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
layer(width,depth,thickness*4-0.4, thickness*4-0.4, FrontPanelEmbedmentDepthBot, thickness);
translate([width/2-2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([width/2-2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
}

}else{
Expand Down Expand Up @@ -104,13 +105,13 @@ if(arangeForPrint==1){
union(){
if(enableBOTinside==1){
// panel
% translate([0,depth/2+3.5*thickness,-FrontPanelEmbedmentDepth])
% translate([0,depth/2+3.5*thickness,-FrontPanelEmbedmentDepthBot])
difference(){
layer(width,depth,thickness*4-0.4, thickness*4-0.4, FrontPanelEmbedmentDepth, thickness);
translate([width/2-2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([width/2-2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepth+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
layer(width,depth,thickness*4-0.4, thickness*4-0.4, FrontPanelEmbedmentDepthBot, thickness);
translate([width/2-2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,-depth/2+2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([width/2-2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
translate([-width/2+2*thickness,depth/2-2*thickness,-0.1]) cylinder(h=FrontPanelEmbedmentDepthBot+0.2, d=FrontPanelScrewDia+0.2, center=false, $fn=60);
}
}
% translate([width/2+1.0*thickness, depth/2+2*thickness,0]) rotate([60,0,0]) SealingTrowel();
Expand Down

0 comments on commit 4c351e8

Please sign in to comment.