Skip to content

nebhead/PlexPostProc

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

49 Commits
 
 
 
 
 
 

Repository files navigation

PlexPostProc

Plex PostProcessing Script for DVR(Beta) on Ubuntu 14.04 (or later) Server or Official Docker

If you're like me, you probably just want a no-frills/no-fuss script to convert your recorded content from Plex DVR, down to a much smaller file size. Personally, I wanted to downsize more significantly, so I convert to 720 as well. Your mileage may vary and you can play with ffmpeg or handbrake's settings to get just the right config for you.

I wanted to create a very, very simple script to do the conversion with no frills. All seems to be working fine in its current state so I'm happy to share with the world.

2022-02-02 apassiou Update:

  • This update mostly focuses on ffmpeg configuration changes. Added menu to customize framerate, quality, audio downmixing and codec selection
  • You need FFMPEG with HEVC (libx265) to use FFMPEG. Recommended Ubuntu 20.04 or later to utilize libx265 3.2+
  • Defaults are set to FFMPEG HEVC 23.976 FPS with QC 26 and audio 2Ch AAC at 96kbps - This generates 720p videos with adequate quality at ~400Mb per hour
  • Combined logging into a single log for easier tracking
  • Cleaned up logging, added size stats (start size -> compressed size) and time taken to transcode
  • Added ppp file lock timeout of 2 hours to avoid race condition
  • Added cleanup of other tmp.* files in /tmp/
  • NOTE: Handbrake and nvenc portions of the script are unchanged.

2020-04-02 Update 1: Added some logging and lockfile capability (inspired by (this blog by thatvirtualboy)[https://thatvirtualboy.com/2017/11/28/plex-dvr-postprocessing-script.html]), to try and work around an issue with Plex where it deletes all .grab folders/files after one script completes. This obviously isn't a good scenario if we have simultaneous scripts running.

2020-04-02 Update 2: Converged handbrake and ffmpeg

2020-05-05 Update: Added Plex Transcoder w/NVENC support as an option. (Thanks to Plex user /u/cedarrapidsboy for adding) This is untested on my side, but I've been told it works in the Docker install.

Prereqs

FFmpeg or HandBrakeCLI

How to install the right version of ffmpeg on Ubuntu 14.04 server

Install FFMPEG from the native repository (optionally build your own or grab from another repo)

sudo apt-get update
sudo apt-get install ffmpeg

How to install the right version of Handbrake CLI on Ubuntu 14.04 server

If you already have handbrake installed from the default repository, you'll want to remove it first. Last I checked, the default version dropped support for h264 natively.

sudo apt-get purge handbrake

Now install this repository and the handbrake-cli (command line interface) software.

sudo add-apt-repository ppa:stebbins/handbrake-releases
sudo apt-get update
sudo apt-get install handbrake-cli

How to install FFMPEG inside the Plex Docker Container

Adding the latest FFMPEG to the container directly, by entering the container:

sudo docker exec -it plex /bin/bash

Then inside the container:

apt update && apt install -y software-properties-common
apt install ffmpeg
exit 

Installation

First you will need to get the script onto your machine. You can do this by cloning my git repository or simply downloading and placing in a directory of your choice.

sudo apt-get update
sudo apt-get install git
git clone -b FFMPEG-Branch https://github.com/nebhead/PlexPostProc
cd PlexPostProc
sudo chmod 777 PlexPostProc.sh

NEW (2020/04/30): Since BETA PMS Version 1.19.3.2740-add6f438d, you'll need to place your scripts in a special script folder inside the Plex server application directory structure. Postprocessing scripts must now be located inside APPDATA/Scripts. Thus you MUST move the PlexPostProc.sh script to that folder. You may need to create that folder yourself. Below is an example of how I did this on my Docker install.


Example:

This may be different for a pure Linux or MacOS setup, so your mileage may vary.

On my Docker build, my APPDATA/Scripts folder is here:

/config/Library/Application Support/Plex Media Server/Scripts

Where my 'config' folder is a Docker volume. My config folder is mapped to

/home/docker/plex/config

Thus, I needed to move my script by doing this:

sudo mkdir /home/docker/plex/config/Library/Application Support/Plex Media Server/Scripts/
sudo mv PlexPostProc.sh /home/docker/plex/config/Library/Application Support/Plex Media Server/Scripts/

Now go to Plex's webui and go to server settings > DVR (Beta) > DVR Settings

From there you should be able to enter the name of the post processing script and you should be done.

For example:

PlexPostProc.sh

Finally, you may want to edit the script to customize some parameters at the top of the file. Here are the defaults:

TMPFOLDER="/tmp"
ENCODER="ffmpeg"  # Encoder to use:
                  # "ffmpeg" for FFMPEG [DEFAULT]
                  # "handbrake" for HandBrake
RES="720"         # Resolution to convert to:
                  # "720" = 720 Vertical Resolution
                  # "1080" = 1080 Vertical Resolution

That's it.
Happy Post-Processing!

NOTE on Docker Installs: If you're using the official Docker, you'll need to install FFMPEG or HandbrakeCLI inside the Docker Container, and need this script itself to be inside the Docker Container or in a volume that is accessible by the Plex Docker Container. I'll update these instructions in the future if there is a request.

Troubleshoooting

It has been noted that in some cases (for example on MacOS or FreeBSD OSes) the script will fail due to the fact that the FFMPEG or Handbrake binary is not found on the system. In these cases, you may need to modify the script to include the full path to the executable.

For example, change this line:

ffmpeg -i "$FILENAME" -s hd720 -c:v libx264 -preset veryfast -vf yadif -c:a copy "$TEMPFILENAME"

To this:

/usr/local/bin/ffmpeg -i "$FILENAME" -s hd720 -c:v libx264 -preset veryfast -vf yadif -c:a copy "$TEMPFILENAME"

Where "/usr/local/bin" is the path to the executable.

About

Plex PostProcessing Script for DVR(Beta)

Resources

Stars

Watchers

Forks

Releases

No releases published

Sponsor this project

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages