v02-03-03

v02-03-03

• 2024-03-11 tmadlener (PR#140)

  • Update the README to point to the v02-03-03 release
  • Add brief description of how to get an ILDConfig that is consistent with the release

• 2024-03-11 tmadlener (PR#137)

  • Add a Gaudi options file to run the standard reconstruction with some command line arguments to configure what to run
    • Created via automatic conversion of the Marlin steering file plus the necessary adaptions to make it run
    • Run from LCIO or EDM4hep inputs (mutually exlusive), use --inputFiles
    • Produce EDM4hep output only by default, but allow to add LCIO output as well or switch to that using --lcioOutput.
    • Read the README section to see all available command line arguments
  • The overall reconstruction chain is modularized effectively in the same way as it was previously done for Marlin.
    • Different parts of the chain live in different files, where each file defines part of the whole chain as a sequence.
    • These sequences are dynamically loaded and configured depending on calibration constants, which depend on the CMS energy as well as the detector model.
  • Calibration for the different detector models is also split into different .cfg files which essentially all just define a single dictionary with all calibration constants. The same approach is followed by the CMS energy dependent config parameters.

• 2024-03-08 tmadlener (PR#139)

  • Make sure standard workflow still runs with default PFA by ensuring the PFAtype constant is non empty.
  • Rename the default PFA configuration to PandoraPFAStd.xml

• 2024-02-23 Ulrich Einhaus (PR#138)
  Add CPID calibration for ILD MC production of 2020, one based on training with single particles and one based on 2-fermion-Z-hadronic events.

  This includes the weight files and the reference files which point to the weight files. In addition, the CPID steering is added to the MarlinRecoMiniDST.xml. Paths are relative and only work if executed from the StandardConfig/production folder!

• 2024-01-10 Gerald Grenier (PR#135)
  Add option to run different PFA type in Standard Reco and add an xml file to run perfect PandoraPFA based on MC truth.

v02-03-02

v02-03-02

• 2023-02-24 Jan Klamka (PR#134)
  • Digitisation including the hits from CLIC-like outer tracker and changes for the FTD, allowing for further use of the Conformal Tracking
  • Conformal tracking with input collections from the new ILD_l5_v09 model, parameters setup as in CLIC config.

v02-03-01

Configuration for the v02-03-01 developers patch release. No change w.r.t. v02-03

v02-03

v02-03

• 2022-06-29 Gerald Grenier (PR#131)

  • Add Calibration files to be able to run standard Marlin reconstruction on ILD simulation with Videau geometry.
  • For this first pass, files are only link to current ILD option 2 model from hybrid TESLA geometry.
  • Verification that Marlin runs on both small and large ILD Videau geometry have been done.

• 2022-04-20 Bohdan Dudar (PR#133)

  • Added TrackLength processor in the HighLevelReco chain.

• 2022-03-14 Bohdan Dudar (PR#132)

  • All steering parameters of TOFEstimators are explicitly specified in the steering file w/o any modification to the behaviour

v02-02-03

v02-02-03

• 2021-07-28 YONAMINE Ryo (PR#130)

  • Add a new weight/vtxprob set trained with 2f processes at 250 GeV (MC2020).

• 2021-07-28 Daniel Heuchel (PR#128)

  • Corrected Collection Name Track-MCTruth Link

• 2021-07-28 Thomas Madlener (PR#127)

  • Introduce the lcgeo_DIR constant into the mini-DST workflow. This makes it possible to set this value from the outside without having to rely on an envrionment variable being resolved automatically.

• 2021-07-20 Thomas Madlener (PR#129)

  • Update the README to use the v02-02-02 release

v02-02-02

v02-02-02

• 2021-06-16 tmadlener (PR#126)

  • Rename the mini-DST-maker.xml steering file to MarlinStdRecoMiniDST and make it a bit easier to configure from the outside
    • Add short description of some available configuration parameters to the miniDST README.
  • Add processors to run angular dEdx correction (see iLCSoft/MarlinReco#91). Make it possible to disable this via a parameter.
  • Unpack a default LCFIPlus weights tarball to make it possible to run the miniDST workflow with a minimal default configuration.
  • Copy the IsolatedLeptonTagger weights to ILDConfig from MarlinReco/Analysis/IsolatedLeptonTagging
    • Consider removing them from MarlinReco/Analysis/IsolatedLeptonTagging as they are "configuration" parameters that should be in ILDConfig
    • Easier to use in the miniDST creation example
  • Add run_standard_workflow.sh for testing of iLCSoft installations
    • Runs 3 evt SIM and RECO steps to produce DST files, which are then also used to make an LCTuple file as well as a mini-DST from it.

• 2021-06-15 shkawada (PR#125)

  • added mini-DST-maker.xml: for the mini-DST file production
  • README_mini-DST.md: readme file for mini-DST-maker.xml

• 2021-02-02 Remi Ete (PR#124)

  • Updated dE/dx parameters in Likelihood PID processor

v02-02-p02

250 GeV production release update with dE/dx factors update in PIDLikelihood processor

v02-02-01

Configuration for the v02-02-01 patch release (same as v02-02-p02)

v02-02-p01

250 GeV production release update with LCFIPlus weigth files for flavour tagging.

v02-02 production release

configuration for production release v02-02 (same as v02-01-02).