Skip to content

chengjingfeng/DCGAN-for-Bird-Generation

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits
 
 
 
 
 
 
 
 

Repository files navigation

DCGAN for Bird Generation

This repository was created for me to familiarize with DCGANs and its peculiarities. The code uses Keras library and the Caltech-UCSD Birds-200-2011 dataset.

Caltech-UCSD Birds-200-2011 dataset

This dataset has 11788 images from 200 different birds. It includes also some additional information such as segmentations, attributes and bounding boxes that will not be used in this project. Here are some of the different images in this dataset:

CaltechBirdExample

I was looking for a different dataset for my personal experiments, and when I found it, it seemed like a good idea to try generate birds from this dataset.

DCGANS

I tried to implement a DCGAN (Deep Convolutional GAN) since most of GANs are at least loosely based on the DCGAN architecture. The original DCGAN architecture proposed by Radford et al. (2015), can be shown in the next image:

dcgan_arch

Like traditional GANs, DCGANs consist in a discriminator which tries to classify images as real or fake, and a generator that tries to produce samples that will by fed to the discriminator trying to mislead it. DCGANs usually refer to this specific style of architecture shown in the previous figure, since previously proposed GANs were also deep and convolutional prior to this work.

From the original paper we can find some tips to make DCGAN work:

  • Replace any pooling layers with strided convolutions (discriminator) and fractional-strided convolutions (generator).
  • Use batchnorm in both the generator and the discriminator.
  • The last layer of the generator and first layer of the discriminator are not batch normalized, so that the model can learn the correct mean and scale of the data distribution
  • Remove fully connected hidden layers for deeper architectures
  • Use ReLU activation in generator for all layers except for the output, which uses Tanh.
  • Use LeakyReLU activation in the discriminator for all layers.
  • The use of the Adam optimizer rather than SGD with momentum.

DCGAN train

Although I tried different architectures based on other papers and repositories, the best result was achieved using a traditional DCGAN architecture (see the code for more datails)

In each training iteration:

  1. A batch of images of the original dataset is obtained and is normalized between -1 and 1.
  2. A number of noise vectors equal to the batch size, each one with size (1, 1, 100), is generated. These vectors will be the ones that will generate the new images.
  3. The noise vectors are used by the generator to create a batch of generated fake images.
  4. Add some noise to the labels of both real and fake images (instead of just giving ones and zeros to the discriminator)
  5. Train the discriminator with the real and fake images separately.
  6. Generate a number of batch size x 2 of noise vectors, that will be used to train the generator.
  7. Assign opposite labels to the generated images with noise (we are trying to mislead the discriminator)
  8. Train the discriminator with the generated images.

Notes

Each epoch, 3 bathes of generated images are saved in the disk as .png files and each 5 epochs the models are saved in the disk. Also the loss plot is saved in the end of each epoch.

It is important to have the folders generated images and models in the same path of the trainDCGAN.py file.

WGANs

After training the DCGAN, I wanted to compare the results with the WGAN proposed by Arjovsky et al. (2017), therefore I also implemented code for WGAN training in Keras.

In this paper, it is proposed a meaningful loss function, which helps debugging GANs and tuning its parameters and architectures. This loss function, the Wasserstein loss (or Earth-Moving loss), is shown to have a relationship with image quality. The use of this new loss function has proven to avoid mode collapses (generating similar images) even when fully connected layer GANS are used or when batch normalization is not used.

The word discriminator in this paper is replaced by critic since its purpose is not to classify directly if the image is true or fake – we have no longer a binary classification problem. The critic no longer needs to output a probability. When training the critic, the labels provided for the real images are 1’s and for the fake images are negative 1’s.

Fake and real images are interpreted as coming from a probability distribution, the WGAN tries to measure the difference between these distributions and minimize it (by minimizing the loss). Since the computation of Wasserstein distance is intractable, the paper uses an approximation:

K.mean(y_true * y_predicted)

This only works if the network used is K-Lipschitz. In order this to be true, weights are clamped in the discriminator to very small values near zero. The authors admit this is not the ideal solution, but in practice works (notice that the improved version of the WGAN resolves this problem in a more interesting way).

In the traditional DCGANs to get good images we need to balance the train between the generator and the discriminator. With the new Wasserstein loss, this problem is solved: since the Wasserstein distance is almost every time differentiable, the critic can be train to convergence before training the generator, since the gradients become more accurate in this process.

Regarding the training some topics need to be referred:

  • The critic is trained for 100 times for each generator train iteration in the first 25 generator train updates. After this, it is trained for 5 iterations for each generator iteration (every 500 generator iterations the critic is trained again for 100 times).
  • Each critic iteration the weights are clipped to smaller values near zero (-0.01 to 0.01)
  • The optimizer should not use momentum (therefore RMSProp is used) and a low learning rate should be used
  • Training is very slow due to the learning rate and the number of critic updates in each generator update.

The loss function is expected is similar to the shown by the paper:

WGAN_loss

Additionally there are some interesting facts that I discovered that I think might help someone:

  • Since we have no longer a classification problem the loss should no longer tend to 0.5. For a perfect generator the loss should be 0.
  • When the critic isn't trained optimally, the loss curves aren't as smooth as shown in the paper, leading to the presence of peaks. This can occur due to high learning rates, momentum of the optimizer and low number of discriminator iterations. In his github repo, the original author refers that: "when the curve is making a big jump like this and keep iterating the critic till the curve goes up again to roughly were it was before the jump."
  • Also the author in reddit referred that "The discriminator takes longer to train, since it has to saturate some weights at a larger value. This means that you can be a risk of having an insufficiently trained critic, which can provide bad estimates and gradients. Sometimes sign changes are required in the critic, and going from c to -c on some weights will take longer. If the generator is updated in the middle of this process the gradient can be pretty bad."

Results

Evolution of generated images along 190 epochs:

ResultsGIF

Here are some of the Images Generated in the End of the Training:

generatedsamples_epoch190_batch50

generatedsamples_epoch190_batch100

generatedsamples_epoch190_batch150

And here is the generator and discriminator loss evolution during training:

traininglossplot

The training was done in a laptop with Ubuntu 16.04 with a NVIDIA GTX-960M and it took a dozen of hours. I am quite satisfied with the result. The images are a little blurred but it seems like the generator learnt how to make artistic bird images.

The results could be better but I'm quite satisfied with the mutant birds it generated. You can say what you want but these are my mutant birds... Despite that I'll try to make improvements in the future to the DCGAN when I have some time.

WGAN Results

I followed the same architecture used for DCGAN in order to have a proper comparision of the results. The weights were initialized in a different manner in order not to be all clamped at the beggining of the training.

Notice that in train_wgan.py the results are not saved in a png file. I decided to use tensorboard on this one, so the plots will be saved in a log file that you can open with tensorboard (assuming you're using tensorflow as keras backend).

The training was performed for almost 20000 generator iterations and took almost 3 days in the same setup described earlier. The loss curves follow the convergence referred in the original paper:

Plot_Of_Losses

The peaks observed in the loss curves, are probably one of the problems described by the author and referred earlier: the critic probably wasn't trained until optimally. I tried to follow the author's sugestions and change the learning rates and increase the number of critic iterations, but the peaks continued to occur. Probably this was one of the reasons why I did not see imporvements in the generated images. Here is one example after 20k iterations:

generated_samples

Despite that, I think the new loss function is quite usefull to know when a specified GAN is converging or not, despite of being a lot slower than traditional DGANs. With a little more investigation and time (let's not forget it took 3 days to train the WGAN) I think the problem of the peaks could be removed by training more the discriminator.

After taking a more deeper look into the pytorch original code I found out that the bias of the layers were set to False. I could not find why this is done, but this may also contibuted to the results in my WGAN, since I set the biases by default.

Possible Improvements

If I have some time later I will probably try some of these:

  • Use the cropped images with the dataset bounding boxes instead of the full images.
  • Train improved version Wassestein with gradient penalty.
  • Use the label information to train a better Generator, for example using Auxilliary GANs or Conditional GANs
  • Explore different types of architectures

References

  • Wah C., Branson S., Welinder P., Perona P., Belongie S. “The Caltech-UCSD Birds-200-2011 Dataset.” Computation & Neural Systems Technical Report, CNS-TR-2011-001
  • Radford, Alec, Luke Metz, and Soumith Chintala. "Unsupervised representation learning with deep convolutional generative adversarial networks." arXiv preprint arXiv:1511.06434 (2015).
  • Goodfellow, Ian. "NIPS 2016 tutorial: Generative adversarial networks." arXiv preprint arXiv:1701.00160 (2016).
  • Arjovsky, Martin, Soumith Chintala, and Léon Bottou. "Wasserstein gan." arXiv preprint arXiv:1701.07875 (2017).

Credits

Of course I have based my code on other projects and repositories. I would like to give credit to some of them:

About

DCGAN and WGAN implementation on Keras for Bird Generation

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%