To construct this project, follow these steps:
- Refer to the No-OS build guide at https://wiki.analog.com/resources/no-os/build.
- Duplicate the contents of this repository into a new directory within the project directory obtained from the No-OS repository.
- Execute the command: "make".
- Execute the command: "make run".
Network connection:
-
Execute the "make" and "make run" commands with NO_OS_STATIC_IP=y flag. (This is the fastest way of testing the platform, since it doesn't require the DHCP configuration or DHCP timeout (in case of AutoIP))
-
This will result in using 169.254.97.40 as an IP address. In case a link local address is used, the user may need to add a static route if the PC has multiple network interfaces up. If using Linux, this can be done by running the following in a terminal:
sudo ip route add 169.254.97.40/32 dev if_nameif_nameshould be replaced with the name of the network interface the SWIOT1L board is connected on.