Tinker Board Debian 10 V3.0.11

Tinker Board Debian 10 V3.0.11

TinkerOS default username is "linaro", password is "linaro"

Release Notes:
*Change log

1. First official release version for Tinker Board S R2.0 series.
2. Support configuration to enable/disable UMS mode.
3. Improve display compatibility.
4. Support AICC.

*Support Models:

• Tinker Board R2.0
• Tinker Board S R2.0
• Tinker Board
• Tinker Board S

SHA256:
ed45d5dc37093ba30a3016ff26cd10ab6109ad98a03c1c8d15b7392b5782508b (zip)

Tinker Board Debian OS V2.1.16

Tinker Board Debian OS V2.1.16

TinkerOS default username is "linaro", password is "linaro"

Release Notes:

1. Fix the flickering issue for IMX219 in full size mode
2. Fix the issue that channel halted with unknown reason for dwx2 USB host
3. Fine tune TX/RX delay for RK3288 LAN and RGMII driving for RTL8211E.
4. Fix the issue that noise occurs when playing 24bits 96KHz WAV file.
5. Resolve the failure to saveenv for u-boot when booting up from eMMC
6. Enable kernel setting for adjusting HDMI brightness, contrast, saturation, and hue
7. Build in driver for DS3231 RTC module
8. Support ASUS USB BT500 (RTL8761BU) dongle
9. Fix SPI issue to support Waveshare-Expansions.
10. Improve HDMI compatibility.

SHA256:
ab95580acca138d9d59418006dfb7a65ae6ab8e970d75c782b86fc5e498e4bc9 (zip)

Tinker Board Debian OS V2.1.11

Tinker Board Debian OS V2.1.11

TinkerOS default username is "linaro", password is "linaro"

Release Notes:

1. Fix the issue that touch may not work when using SD to boot
2. Rollback and hold Chromium at chromium_63.0.3239.84-1_deb9u1_armhf.deb since the newer version cannot play HTML5 video
3. HDMI: Fix the blank screen issue for Acer KG221Q display
4. Change the GPU maximal frequency to 600Mhz
5. Fix the memory leak for GStreamer.

SHA256:
2d19a90d17dd5b1309ebb333121bb353aad6db421c6a6582dcd5e9c78e5fe0c8 (zip)

TinkerOS_Debian v2.0.8

TinkerOS_Debian V2.0.8

TinkerOS default username is "linaro", password is "linaro"

Release Notes
*Changelog

1. Merge Upstream/Rockchip (commit: 40e8774, kernel: 4.4.132).
2. Upgrade Mali driver, libmali from r9p0 to r13p0
3. Upgrade Linaro package to 20180823
4. Upgrade to Rockchip new ISP driver. (User needs to switch CSI camera by device tree overlay)
5. Support IMX219 with AE/AWB functions.
6. Add OV5647 overlay.
7. Supported Wake On LAN from Suspend to RAM.
8. Support more USB DACs.
9. Add brightness node and support backlight control for DSI Touch Display.
10. Enable FRAMEBUFFER_CONSOLE_ROTATION, to support display rotation for the framebuffer console.
11. Update DS18B20 driver, enable w1_res attribute to support convert time setting.
12. Enable USB_SERIAL_MOS7840 kernel driver.
13. Support ES90x8 Q2M based DAC board.
14. Merge pull request #18, enable more kernel config for iptables.
15. Support Wi-Fi Direct.
16. Enable BT_BNEP kernel configs, to support BNEP protocol.
17. Pre-install cron & logroate package, to support log rotation.
18. Fix Wi-Fi function may fail at first time boot.
19. Improve HDMI hot-plug detection and resolution auto setting.

MD5:
1f1d874a301e156af562618280cdab23 (zip)
0e78b5ff1c1a95494a90dba6ff55a198 (img)

TinkerOS_Debian v2.0.7

TinkerOS_Debian V2.0.7

TinkerOS default username is "linaro", password is "linaro"

Release Notes
*Changelog

1. Merge Upstream/Rockchip (commit: 2801809, tag: release-20171213, kernel: 4.4.103).
2. Update Qt video for Media Player to support repeat function.
3. Improve the HDMI Eye Pattern.
4. Fixed onboard USB audio module missing after resume from suspend.
5. Update U-Boot's UMS name to "TinkerBoard UMS disk".
6. Set the GPIO pins default mode to input mode.
7. Support CAN-Bus.
8. Fixed Tinker Board can not be used as Wi-Fi AP.
9. Add missing spidev nodes when SPI enable.
10. Support Google AIY Voice Kit (v2) HAT sound card.
11. Sync Rockchip package to support display ratio setting.
12. Improve the USB camera performance.
13. Support ADS7846 touch screen for 4"/3.5" HDMI LCD.
14. Set U-Boot only stop the autoboot when triggered the space key.
15. Update rtl8723bs driver.
16. Improve the WiFi roaming fail issue.
17. Fix the warning message when trying to build the Kernel source code.
18. Add back the missing comment of the rk3288-gpiomem.c file.

*ARM Security Update:

1. Meltdown and Spectre
   Variant 1: bounds check bypass (CVE-2017-5753)
   Variant 2: branch target injection (CVE-2017-5715)

*Tinker CLI and GUI's Configuration Tools (Experimental):

1. Support to enabled/disabled wlan verbose log.

MD5:
bbe7fe5b56c5bb4ce3ebd057b939ebda (zip)
1a723676d5e977096a8fbabf8ef06bc4 (img)

TinkerOS_Debian v2.0.5

TinkerOS_Debian V2.0.5

TinkerOS default username is "linaro", password is "linaro"

Release Notes
*Changelog

1. Support Adafruit 3.5" TFT Touchscreen.
2. Pre-install GPIO libraries foy C, Python and Scratch.
3. Change U-Boot debug port from UART1 to UART3.
4. Improved the Kinect support.
5. Fix chromium 61 version enable gpu failure issue.
6. Add remote controller with lirc.
7. Add HDMI CEC protoctol handling (Tinker Board S)
8. Set the CPU minimum freq at 600 MHz
9. Improved GPIO interface initialization script
10. Improved the tinker-config permission.
11. Update RK packages to fix bug for playing video 1920x1072 hevc
12. Enable SND_ALOOP and SND_DUMMY as kernel module.
13. Improved Xorg performance when dragging windows
14. Enable TASKSTATS, TASK_DELAY_ACCT, TASK_XACCT and TASK_IO_ACCOUNTING to support iotop tool
15. Fix video layer over other layers
16. Disable HDMI audio when audio HAT is used.
17. Enable USB_SERIAL_CH341
18. Use Device Tree for DSI Touchscreen
19. Improved the UMS mode detection
20. Support Add w1_therm for DS18B20 and set the default w1-gpio's pin to GPIO 17 (GPIO0 C1).
21. Support the old v1.0 spec of MIPI-DSI Touchscreen Display.
22. Support RTC DS1307.
23. Support IR receiver (TOSHIBA G83C0004D310).
24. Improved the XBOX Controllers support
25. Support USB LTE module (MEIG SLM750)
26. Support ReSpeaker 2-Mics Pi HAT
27. Support JustBoom DAC
28. Support JustBoom Amp
29. Support JustBoom Digi HAT (Tinker Board S)
30. Support IQAudio Pi-DAC
31. Support IQAudio Pi-Digi+ (Tinker Board S)
32. Support HiFiBerry Digi+ Standard (Tinker Board S)
33. Support HiFiBerry Digi+ Pro (Tinker Board S)

*Tinker CLI and GUI's Configuration Tools (Experimental):

1. Fix change locale error of GUI version
2. Add custom resolution setting interface on GUI
3. Change UART log port from UART1 to UART3
4. Fix change passwd fail
5. Fix keyboard layout setting fail

MD5:
4ff4791c00f27717e6781ef02903f089 (zip)
f2f537deab470c188624f68714443ff8 (img)

TinkerOS_Debian v2.0.4

TinkerOS_Debian V2.0.4
TinkerOS default username is “linaro”, password is “linaro”

Release Notes
*Changelog

1. Support w1-gpio (base)
2. Implement /dev/gpiomem for Debian. DEVMOD=0666
3. disable screen timeout setting (set Blank after to "never")
4. set xmms2 default plugin from ALSA to pulse.
5. Fix chromium 61 version enable GPU failure issue

*Initial support Tinker Board S

*Tinker CLI and GUI's Configuration Tools (BETA):

1. Fix VNC get the wrong status
2. Fix GUI SSH cannot disable

*Debian Security Update:

1. WPA2 (wpa_supplicant) security issue [WPA2 KRACK Attacks]
   CVE-2017-13077
   CVE-2017-13078
   CVE-2017-13079
   CVE-2017-13080
   CVE-2017-13081
   CVE-2017-13082
   CVE-2017-13086
   CVE-2017-13087
   CVE-2017-13088

MD5:
690dbc31c84ba50ad0b3f23e8396e530 (zip)
001762843d8a75cb785347f7cea7d8df (img)

TinkerOS_Debian v2.0.3-beta

TinkerOS_Debian V2.0.3 (Beta version)
TinkerOS default username is “linaro”, password is “linaro”

Release Notes

1. Add CLI and GUI's Configuration Tools (BETA). (CLI: tinker-config & GUI: Preferences > Tinker Board Configuration)
2. Fixed DSI failed to bring up. (for v2.0.1)
3. Let USB audio card would not break the PulseAudio's some setting.
4. Enable UART4.
5. Add a node to provide the board's information at "/proc/board_info". (e.g. Tinker Board)
6. Add more hardware interface config (SPI0/UART2/UART3/UART4/PCM) setting at hw_intf.conf.
7. Fixed some OV5647 model cant enable.
8. Fix USB handle NAK for IN OUT SSPLIT CSPLIT transfer. (GitHub debian_kernel#3)
9. Fixed lxsession some functions (Logout / Switch User) not work.
10. Update QT5, GStreamer, xserver packages.
11. Support USB-AC56 (RTL8812AU), USB-AC68 (RTL8814AU).
12. Modify DTS overlay folder name & add prefix/postfix for overlay file(s).
13. Support more Audio DAC HAT. (e.g. HiFiBerry DAC+ Light, HiFiBerry DAC+ Standard (RCA), HiFiBerry AMP+, IQAudio Pi-DAC+, IQAudio Pi-DAC Pro, IQAudio Pi-DigiAMP+)
14. Add a 100MB Swap Space for system.
15. Support use lshw to show the board's informations.
16. HDMI: Let system try to use some default resolutions (e.g. 1080P) to fix sometime cant detection with right resolutions.
17. Enable PPS GPIO.
18. Change default hostname to "tinkerboard". (can find the device with tinkerboard.local at local network)
19. [SECURITY-PATCH] Bluetooth: Properly check L2CAP config option output buffer length.
20. Fixed x window screen blank after system's time update.
21. Auto detects the rootfs path.
22. Enable Docker support.
23. Use systemd-timesyncd to replace the ntp, let time sync more quickly.
24. Fixed tty1 can't login's error.

MD5:
0ff16463a82c0ddaec7900ee198533c2 (zip)
f026cb4713b4965201cec64ec24186d1 (img)