Skip to content

PrintersForAnts/Tiny-T

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

20 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Tiny-T (revision 2.0)

Tiny-T is a Voron Trident with build volume 150mm^3.

Source: https://github.com/VoronDesign/Voron-Trident

License: License

Changes: Tiny-T "branding" and scale modelling down.

Changes from revision 1.0 to revision 2.0

  • With the addition of the tophat, the vertical extrusions are now back to 400mm, according to Trident specifications
  • Side, Front and Rear panels have reduced their height by also 25mm
  • Single front door
  • New door hinges and handles
  • New rear panel with mounting holes for the air filter
  • New bed design that support M3 screws to hold the build plate aligned

Important: if ordering panels from vendors, make sure they are using the latest DXF files

Frame Specs

If ordering from Misumi, these are the specs:

Misumi HFSB5-2020-400-LCP-RCP-AV260		4 (corner extrusion)
Misumi HFSB5-2020-270-TPW 			9 (top, bottom, front[top/bottom], rear top extrusions)
Misumi HFSB5-2020-270-AH135-TPW 		1 (rear bottom extrusion)
Misumi HFSB5-2020-230-LTP			1 (rear Z extrusion)
Misumi HFSB5-2020-230				1 (x gantry extrusion)
Misumi HFSB5-2020-140				1 (rear gantry extrusion)
Misumi HFSB5-2020-270-AH135			1 (bed extrusion)
Misumi HFSB5-2020-132-LTP			1 (bed extrusion)

Components

Mods used