Bump to ACK 4.19.253

ACK 4.19.253

Documentation/networking/ip-sysctl.txt

@@ -820,7 +820,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -902,7 +902,7 @@ ip_nonlocal_bind - BOOLEAN
 	which can be quite useful - but may break some applications.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 252
+SUBLEVEL = 253
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/arm/boot/dts/imx6qdl-ts7970.dtsi

@@ -226,7 +226,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -413,7 +413,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};

arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts

@@ -170,7 +170,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};

arch/arm/include/asm/ptrace.h

@@ -167,5 +167,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif

arch/arm/mm/alignment.c

@@ -936,6 +936,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:

arch/arm/mm/proc-v7-bugs.c

@@ -110,8 +110,7 @@ static unsigned int spectre_v2_install_workaround(unsigned int method)
 #else
 static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
-	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
-		smp_processor_id());
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
 
 	return SPECTRE_VULNERABLE;
 }
@@ -223,10 +222,10 @@ static int spectre_bhb_install_workaround(int method)
 			return SPECTRE_VULNERABLE;
 
 		spectre_bhb_method = method;
-	}
 
-	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
-		smp_processor_id(), spectre_bhb_method_name(method));
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
 
 	return SPECTRE_MITIGATED;
 }

arch/arm/probes/decode.h

@@ -22,6 +22,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -43,31 +44,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;

arch/arm64/configs/gauguin_defconfig

@@ -4,13 +4,13 @@
 #
 
 #
-# Compiler: Nexus clang version 15.0.0 (https://github.com/llvm/llvm-project 83fdf0c34e60e61849574d30c39cf7f7324c5271)
+# Compiler: Proton clang version 13.0.0 (https://github.com/llvm/llvm-project b4fd512c36ca344a3ff69350219e8b0a67e9472a)
 #
 CONFIG_GCC_VERSION=0
 CONFIG_CC_IS_CLANG=y
 CONFIG_LD_IS_LLD=y
-CONFIG_CLANG_VERSION=150000
-CONFIG_LLD_VERSION=150000
+CONFIG_CLANG_VERSION=130000
+CONFIG_LLD_VERSION=130000
 CONFIG_CC_HAS_ASM_GOTO=y
 CONFIG_TOOLS_SUPPORT_RELR=y
 CONFIG_IRQ_WORK=y

arch/x86/kernel/head64.c

@@ -383,6 +383,8 @@ static void __init clear_bss(void)
 {
 	memset(__bss_start, 0,
 	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
+	memset(__brk_base, 0,
+	       (unsigned long) __brk_limit - (unsigned long) __brk_base);
 }
 
 static unsigned long get_cmd_line_ptr(void)

build.sh

@@ -55,7 +55,8 @@ build_kernel(){
     echo "------------------------------";
     echo " Building Kernel ...........";
     echo "------------------------------";
-
+
+    rm -rf $OUT/AnyKernel3-main;
     make CC=$CC ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE CROSS_COMPILE_COMPAT=$CROSS_COMPILE_COMPAT CLANG_TRIPLE=$CLANG_TRIPLE $CC_ADDITION_FLAGS O=$OUT -j$THREAD;
     END_SEC=$(date +%s);
     COST_SEC=$[ $END_SEC-$START_SEC ];

drivers/cpufreq/pmac32-cpufreq.c

@@ -474,6 +474,10 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (slew_done_gpio_np)
 		slew_done_gpio = read_gpio(slew_done_gpio_np);
 
+	of_node_put(volt_gpio_np);
+	of_node_put(freq_gpio_np);
+	of_node_put(slew_done_gpio_np);
+
 	/* If we use the frequency GPIOs, calculate the min/max speeds based
 	 * on the bus frequencies
 	 */

drivers/irqchip/irq-or1k-pic.c

@@ -70,7 +70,6 @@ static struct or1k_pic_dev or1k_pic_level = {
 		.name = "or1k-PIC-level",
 		.irq_unmask = or1k_pic_unmask,
 		.irq_mask = or1k_pic_mask,
-		.irq_mask_ack = or1k_pic_mask_ack,
 	},
 	.handle = handle_level_irq,
 	.flags = IRQ_LEVEL | IRQ_NOPROBE,

drivers/net/can/m_can/m_can.c

@@ -1438,8 +1438,6 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
 					 M_CAN_FIFO_DATA(i / 4),
 					 *(u32 *)(cf->data + i));
 
-		can_put_echo_skb(skb, dev, 0);
-
 		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
 			cccr = m_can_read(priv, M_CAN_CCCR);
 			cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
@@ -1456,6 +1454,9 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
 			m_can_write(priv, M_CAN_CCCR, cccr);
 		}
 		m_can_write(priv, M_CAN_TXBTIE, 0x1);
+
+		can_put_echo_skb(skb, dev, 0);
+
 		m_can_write(priv, M_CAN_TXBAR, 0x1);
 		/* End of xmit function for version 3.0.x */
 	} else {

drivers/net/ethernet/sfc/ef10.c

@@ -2059,7 +2059,10 @@ static int efx_ef10_try_update_nic_stats_vf(struct efx_nic *efx)
 
 	efx_update_sw_stats(efx, stats);
 out:
+	/* releasing a DMA coherent buffer with BH disabled can panic */
+	spin_unlock_bh(&efx->stats_lock);
 	efx_nic_free_buffer(efx, &stats_buf);
+	spin_lock_bh(&efx->stats_lock);
 	return rc;
 }
 

drivers/net/ethernet/sfc/ef10_sriov.c

@@ -415,19 +415,23 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
+	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	unsigned int vfs_assigned = pci_vfs_assigned(dev);
-	int rc = 0;
+	int i, rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
 			   "please detach them before disabling SR-IOV\n");
 		return -EBUSY;
 	}
 
-	if (!vfs_assigned)
+	if (!vfs_assigned) {
+		for (i = 0; i < efx->vf_count; i++)
+			nic_data->vf[i].pci_dev = NULL;
 		pci_disable_sriov(dev);
-	else
+	} else {
 		rc = -EBUSY;
+	}
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;

drivers/net/phy/sfp.c

@@ -1811,7 +1811,7 @@ static int sfp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sfp);
 
-	err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
+	err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp);
 	if (err < 0)
 		return err;
 

drivers/net/xen-netback/rx.c

@@ -482,6 +482,7 @@ void xenvif_rx_action(struct xenvif_queue *queue)
 	queue->rx_copy.completed = &completed_skbs;
 
 	while (xenvif_rx_ring_slots_available(queue) &&
+	       !skb_queue_empty(&queue->rx_queue) &&
 	       work_done < RX_BATCH_SIZE) {
 		xenvif_rx_skb(queue);
 		work_done++;

drivers/nfc/nxp-nci/i2c.c

@@ -138,7 +138,9 @@ static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy,
 	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
 
 	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
-	if (r != frame_len) {
+	if (r < 0) {
+		goto fw_read_exit_free_skb;
+	} else if (r != frame_len) {
 		nfc_err(&client->dev,
 			"Invalid frame length: %u (expected %zu)\n",
 			r, frame_len);
@@ -182,7 +184,9 @@ static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy,
 		return 0;
 
 	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
-	if (r != header.plen) {
+	if (r < 0) {
+		goto nci_read_exit_free_skb;
+	} else if (r != header.plen) {
 		nfc_err(&client->dev,
 			"Invalid frame payload length: %u (expected %u)\n",
 			r, header.plen);

drivers/platform/x86/hp-wmi.c

@@ -75,6 +75,7 @@ enum hp_wmi_event_ids {
 	HPWMI_BACKLIT_KB_BRIGHTNESS	= 0x0D,
 	HPWMI_PEAKSHIFT_PERIOD		= 0x0F,
 	HPWMI_BATTERY_CHARGE_PERIOD	= 0x10,
+	HPWMI_SANITIZATION_MODE		= 0x17,
 };
 
 struct bios_args {
@@ -631,6 +632,8 @@ static void hp_wmi_notify(u32 value, void *context)
 		break;
 	case HPWMI_BATTERY_CHARGE_PERIOD:
 		break;
+	case HPWMI_SANITIZATION_MODE:
+		break;
 	default:
 		pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
 		break;

drivers/tty/serial/8250/8250_port.c

@@ -2917,8 +2917,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;

drivers/tty/serial/amba-pl011.c

@@ -1335,6 +1335,15 @@ static void pl011_stop_rx(struct uart_port *port)
 	pl011_dma_rx_stop(uap);
 }
 
+static void pl011_throttle_rx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pl011_stop_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static void pl011_enable_ms(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1728,9 +1737,10 @@ static int pl011_allocate_irq(struct uart_amba_port *uap)
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned long flags;
 	unsigned int i;
 
-	spin_lock_irq(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1752,7 +1762,14 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+	pl011_enable_interrupts(uap);
 }
 
 static int pl011_startup(struct uart_port *port)
@@ -2127,6 +2144,8 @@ static const struct uart_ops amba_pl011_pops = {
 	.stop_tx	= pl011_stop_tx,
 	.start_tx	= pl011_start_tx,
 	.stop_rx	= pl011_stop_rx,
+	.throttle	= pl011_throttle_rx,
+	.unthrottle	= pl011_unthrottle_rx,
 	.enable_ms	= pl011_enable_ms,
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,