Set GitHub default branch other than 'powerkvm-v3.1.1' #12
Comments
mfoliveira
changed the title
cuinutanix
pushed a commit
to NXPower/linux
that referenced
this issue
May 4, 2017
[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: open-power-host-os#8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . open-power-host-os#9 [] tcp_rcv_established at ffffffff81580b64 open-power-host-os#10 [] tcp_v4_do_rcv at ffffffff8158b54a open-power-host-os#11 [] tcp_v4_rcv at ffffffff8158cd02 open-power-host-os#12 [] ip_local_deliver_finish at ffffffff815668f4 open-power-host-os#13 [] ip_local_deliver at ffffffff81566bd9 open-power-host-os#14 [] ip_rcv_finish at ffffffff8156656d open-power-host-os#15 [] ip_rcv at ffffffff81566f06 open-power-host-os#16 [] __netif_receive_skb_core at ffffffff8152b3a2 open-power-host-os#17 [] __netif_receive_skb at ffffffff8152b608 open-power-host-os#18 [] netif_receive_skb at ffffffff8152b690 open-power-host-os#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] open-power-host-os#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] open-power-host-os#21 [] net_rx_action at ffffffff8152bac2 open-power-host-os#22 [] __do_softirq at ffffffff81084b4f open-power-host-os#23 [] call_softirq at ffffffff8164845c open-power-host-os#24 [] do_softirq at ffffffff81016fc5 open-power-host-os#25 [] irq_exit at ffffffff81084ee5 open-power-host-os#26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <[email protected]> Cc: Hannes Sowa <[email protected]> Signed-off-by: Jon Maxwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
May 17, 2017
commit 45caeaa upstream. As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <[email protected]> Cc: Hannes Sowa <[email protected]> Signed-off-by: Jon Maxwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
May 17, 2017
commit 4dfce57 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. [nborisov: backported to 4.4] Signed-off-by: Eric Sandeen <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cuinutanix
pushed a commit
to NXPower/linux
that referenced
this issue
Aug 3, 2017
commit ba80aa9 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 open-power-host-os#12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by: Bryant G. Ly <[email protected]> Tested-by: Bryant G. Ly <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
Nov 8, 2017
spin_lock/unlock of health->wq_lock should be IRQ safe. It was changed to spin_lock_irqsave since adding commit 0179720 ("net/mlx5: Introduce trigger_health_work function") which uses spin_lock from asynchronous event (IRQ) context. Thus, all spin_lock/unlock of health->wq_lock should have been moved to IRQ safe mode. However, one occurrence on new code using this lock missed that change, resulting in possible deadlock: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&(&health->wq_lock)->rlock); kernel: <Interrupt> kernel: lock(&(&health->wq_lock)->rlock); kernel: #12 *** DEADLOCK *** Fixes: 2a0165a ("net/mlx5: Cancel delayed recovery work when unloading the driver") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
May 24, 2018
…ns[] When adding GP-1-28 port pin support it was forgotten to remove the CLKOUT pin from the list of pins that are not associated with a GPIO port in pinmux_pins[]. This results in a warning when reading the pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO pin. Fix this by removing the duplicated entry which is no longer needed. ~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins [ 89.432081] ------------[ cut here ]------------ [ 89.436904] Pin 496 is not in bias info list [ 89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12 [ 89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) [ 89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.483241] sp : ffff00000aff3ab0 [ 89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698 [ 89.491955] x27: ffff000008ad7d98 x26: 0000000000000000 [ 89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018 [ 89.502690] x23: 0000000000000001 x22: 00000000000001f0 [ 89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000 [ 89.513423] x19: 0000000000000000 x18: ffffffffffffffff [ 89.518790] x17: 0000000000006c4a x16: ffff000008d67c98 [ 89.524157] x15: 0000000000000001 x14: ffff00000896ca98 [ 89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8 [ 89.534891] x11: ffff00000981e000 x10: ffff000008befa08 [ 89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08 [ 89.545625] x7 : ffff000008137094 x6 : 0000000000000000 [ 89.550991] x5 : 0000000000000000 x4 : 0000000000000001 [ 89.556357] x3 : 0000000000000007 x2 : 0000000000000007 [ 89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000 [ 89.567091] Call trace: [ 89.569561] sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.573960] r8a7795_pinmux_get_bias+0x30/0xc0 [ 89.578445] sh_pfc_pinconf_get+0x1e0/0x2d8 [ 89.582669] pin_config_get_for_pin+0x20/0x30 [ 89.587067] pinconf_generic_dump_one+0x180/0x1c8 [ 89.591815] pinconf_generic_dump_pins+0x84/0xd8 [ 89.596476] pinconf_pins_show+0xc8/0x130 [ 89.600528] seq_read+0xe4/0x510 [ 89.603789] full_proxy_read+0x60/0x90 [ 89.607576] __vfs_read+0x30/0x140 [ 89.611010] vfs_read+0x90/0x170 [ 89.614269] SyS_read+0x60/0xd8 [ 89.617443] __sys_trace_return+0x0/0x4 [ 89.621314] ---[ end trace 99c8d0d39c13e794 ]--- Fixes: 82d2de5 ("pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support") Reviewed-and-tested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Niklas Söderlund <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
May 24, 2018
Scheduler debug stats include newlines that display out of alignment when prefixed by timestamps. For example, the dmesg utility: % echo t > /proc/sysrq-trigger % dmesg ... [ 83.124251] runnable tasks: S task PID tree-key switches prio wait-time sum-exec sum-sleep ----------------------------------------------------------------------------------------------------------- At the same time, some syslog utilities (like rsyslog by default) don't like the additional newlines control characters, saving lines like this to /var/log/messages: Mar 16 16:02:29 localhost kernel: #012runnable tasks:#12 S task PID tree-key ... ^^^^ ^^^^ Clean these up by moving newline characters to their own SEQ_printf invocation. This leaves the /proc/sched_debug unchanged, but brings the entire output into alignment when prefixed: % echo t > /proc/sysrq-trigger % dmesg ... [ 62.410368] runnable tasks: [ 62.410368] S task PID tree-key switches prio wait-time sum-exec sum-sleep [ 62.410369] ----------------------------------------------------------------------------------------------------------- [ 62.410369] I kworker/u12:0 5 1932.215593 332 120 0.000000 3.621252 0.000000 0 0 / and no escaped control characters from rsyslog in /var/log/messages: Mar 16 16:15:06 localhost kernel: runnable tasks: Mar 16 16:15:06 localhost kernel: S task PID tree-key ... Signed-off-by: Joe Lawrence <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
paulusmack
pushed a commit
that referenced
this issue
May 24, 2018
The seg6_build_state() function is called with RCU read lock held, so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead. [ 92.770271] ============================= [ 92.770628] WARNING: suspicious RCU usage [ 92.770921] 4.16.0-rc4+ #12 Not tainted [ 92.771277] ----------------------------- [ 92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 92.772279] [ 92.772279] other info that might help us debug this: [ 92.772279] [ 92.773067] [ 92.773067] rcu_scheduler_active = 2, debug_locks = 1 [ 92.773514] 2 locks held by ip/2413: [ 92.773765] #0: (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0 [ 92.774377] #1: (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210 [ 92.775065] [ 92.775065] stack backtrace: [ 92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12 [ 92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 [ 92.776608] Call Trace: [ 92.776852] dump_stack+0x7d/0xbc [ 92.777130] __schedule+0x133/0xf00 [ 92.777393] ? unwind_get_return_address_ptr+0x50/0x50 [ 92.777783] ? __sched_text_start+0x8/0x8 [ 92.778073] ? rcu_is_watching+0x19/0x30 [ 92.778383] ? kernel_text_address+0x49/0x60 [ 92.778800] ? __kernel_text_address+0x9/0x30 [ 92.779241] ? unwind_get_return_address+0x29/0x40 [ 92.779727] ? pcpu_alloc+0x102/0x8f0 [ 92.780101] _cond_resched+0x23/0x50 [ 92.780459] __mutex_lock+0xbd/0xad0 [ 92.780818] ? pcpu_alloc+0x102/0x8f0 [ 92.781194] ? seg6_build_state+0x11d/0x240 [ 92.781611] ? save_stack+0x9b/0xb0 [ 92.781965] ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0 [ 92.782480] ? seg6_build_state+0x11d/0x240 [ 92.782925] ? lwtunnel_build_state+0x1bd/0x210 [ 92.783393] ? ip6_route_info_create+0x687/0x1640 [ 92.783846] ? ip6_route_add+0x74/0x110 [ 92.784236] ? inet6_rtm_newroute+0x8a/0xd0 Fixes: 6c8702c ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Another user experience point.
Today when an user visits the hostos linux repo on github [1] they see the 'powerkvm-3.1.1' branch by default.
They'd probably be better routed to the hostos-stable/devel branches.
Can the default branch be changed to one of those?
See [2] for the few steps required.
Thanks
[1] https://github.com/open-power-host-os/linux/
[2] https://help.github.com/articles/setting-the-default-branch/
The text was updated successfully, but these errors were encountered: