diff --git a/conf.py b/conf.py
index 58b4c4a4d8..06d52f4dd5 100644
--- a/conf.py
+++ b/conf.py
@@ -119,7 +119,7 @@
     "display_github": True,
     "github_user": "ros-planning",
     "github_repo": "moveit2_tutorials",
-    "github_version": "main/",
+    "github_version": "humble/",
     "conf_py_path": "",
     "source_suffix": ".rst",
 }
diff --git a/doc/examples/realtime_servo/realtime_servo_tutorial.rst b/doc/examples/realtime_servo/realtime_servo_tutorial.rst
index 809efe230a..d1579f67de 100644
--- a/doc/examples/realtime_servo/realtime_servo_tutorial.rst
+++ b/doc/examples/realtime_servo/realtime_servo_tutorial.rst
@@ -19,7 +19,7 @@ Launching a Servo Node
 ----------------------
 MoveIt Servo can be launched as a "node component" or a standalone node. The launch file, moveit_servo/servo_example.launch.py, launches a standalone node by default but also contains a commented component node. Commands are sent via ROS topics. The commands can come from anywhere, such as a joystick, keyboard, or other controller.
 
-This demo was written for an Xbox 1 controller, but can be easily modified to use any controller compatible with the `Joy package <https://index.ros.org/p/joy/#{DISTRO}>`_ by modifying the `joystick_servo_example.cpp file <https://github.com/ros-planning/moveit2/blob/main/moveit_ros/moveit_servo/src/teleop_demo/joystick_servo_example.cpp>`_
+This demo was written for an Xbox 1 controller, but can be easily modified to use any controller compatible with the `Joy package <https://index.ros.org/p/joy/#{DISTRO}>`_ by modifying the :moveit_codedir:`joystick_servo_example.cpp file <moveit_ros/moveit_servo/src/teleop_demo/joystick_servo_example.cpp>`.
 
 To run the demo, make sure your controller is plugged in and can be detected by :code:`ros2 run joy joy_node`. Usually this happens automatically after plugging the controller in. Then launch with ::
 
@@ -129,7 +129,7 @@ Requirements for incoming command messages, regardless of input device are:
 Servo Configs
 ^^^^^^^^^^^^^
 
-The `demo config file <https://github.com/ros-planning/moveit2/blob/main/moveit_ros/moveit_servo/config/panda_simulated_config.yaml>`_ shows the parameters needed for MoveIt Servo and is well documented.
+The :moveit_codedir:`demo config file <moveit_ros/moveit_servo/config/panda_simulated_config.yaml>` shows the parameters needed for MoveIt Servo and is well documented.
 
 Start with the parameters from the demo file, but some must be changed for your specific setup:
     1. :code:`robot_link_command_frame`: Update this to be a valid frame in your robot, recommended as the planning frame or EEF frame