Skip to content

Latest commit

 

History

History
874 lines (498 loc) · 32.9 KB

CLI.md

File metadata and controls

874 lines (498 loc) · 32.9 KB
Raw

Command-Line Help for linera

This document contains the help content for the linera command-line program.

Command Overview:

linera

A Byzantine-fault tolerant sidechain with low-latency finality and high throughput

Usage: linera [OPTIONS] <COMMAND>

Subcommands:
  • transfer — Transfer funds
  • open-chain — Open (i.e. activate) a new chain deriving the UID from an existing one
  • open-multi-owner-chain — Open (i.e. activate) a new multi-owner chain deriving the UID from an existing one
  • change-ownership — Change who owns the chain, and how the owners work together proposing blocks
  • change-application-permissions — Changes the application permissions configuration
  • close-chain — Close an existing chain
  • local-balance — Read the current native-token balance of the given account directly from the local state
  • query-balance — Simulate the execution of one block made of pending messages from the local inbox, then read the native-token balance of the account from the local state
  • sync-balance — (DEPRECATED) Synchronize the local state of the chain with a quorum validators, then query the local balance
  • sync — Synchronize the local state of the chain with a quorum validators
  • process-inbox — Process all pending incoming messages from the inbox of the given chain by creating as many blocks as needed to execute all (non-failing) messages. Failing messages will be marked as rejected and may bounce to their sender depending on their configuration
  • query-validator — Show the version and genesis config hash of a new validator, and print a warning if it is incompatible
  • query-validators — Show the current set of validators for a chain
  • set-validator — Add or modify a validator (admin only)
  • remove-validator — Remove a validator (admin only)
  • resource-control-policy — View or update the resource control policy
  • create-genesis-config — Create genesis configuration for a Linera deployment. Create initial user chains and print information to be used for initialization of validator setup. This will also create an initial wallet for the owner of the initial "root" chains
  • watch — Watch the network for notifications
  • service — Run a GraphQL service to explore and extend the chains of the wallet
  • faucet — Run a GraphQL service that exposes a faucet where users can claim tokens. This gives away the chain's tokens, and is mainly intended for testing
  • publish-bytecode — Publish bytecode
  • publish-data-blob — Publish a data blob of binary data
  • read-data-blob — Verify that a data blob is readable
  • create-application — Create an application
  • publish-and-create — Create an application, and publish the required bytecode
  • request-application — Request an application from another chain, so it can be used on this one
  • keygen — Create an unassigned key-pair
  • assign — Link a key owned by the wallet to a chain that was just created for that key
  • retry-pending-block — Retry a block we unsuccessfully tried to propose earlier
  • wallet — Show the contents of the wallet
  • project — Manage Linera projects
  • net — Manage a local Linera Network
Options:

  • --wallet <WALLET_STATE_PATH> — Sets the file storing the private state of user chains (an empty one will be created if missing)

  • --storage <STORAGE_CONFIG> — Storage configuration for the blockchain history

  • -w, --with-wallet <WITH_WALLET> — Given an integer value N, read the wallet state and the wallet storage config from the environment variables LINERA_WALLET_{N} and LINERA_STORAGE_{N} instead of LINERA_WALLET and LINERA_STORAGE

  • --send-timeout-ms <SEND_TIMEOUT> — Timeout for sending queries (milliseconds)

    Default value: 4000

  • --recv-timeout-ms <RECV_TIMEOUT> — Timeout for receiving responses (milliseconds)

    Default value: 4000

  • --max-pending-message-bundles <MAX_PENDING_MESSAGE_BUNDLES> — The maximum number of incoming message bundles to include in a block proposal

    Default value: 10

  • --wasm-runtime <WASM_RUNTIME> — The WebAssembly runtime to use

  • --max-concurrent-queries <MAX_CONCURRENT_QUERIES> — The maximal number of simultaneous queries to the database

  • --max-stream-queries <MAX_STREAM_QUERIES> — The maximal number of simultaneous stream queries to the database

    Default value: 10

  • --cache-size <CACHE_SIZE> — The maximal number of entries in the storage cache

    Default value: 1000

  • --notification-retry-delay-ms <NOTIFICATION_RETRY_DELAY> — Delay increment for retrying to connect to a validator for notifications

    Default value: 1000

  • --notification-retries <NOTIFICATION_RETRIES> — Number of times to retry connecting to a validator for notifications

    Default value: 10

  • --wait-for-outgoing-messages — Whether to wait until a quorum of validators has confirmed that all sent cross-chain messages have been delivered

  • --long-lived-services — (EXPERIMENTAL) Whether application services can persist in some cases between queries

  • --tokio-threads <TOKIO_THREADS> — The number of Tokio worker threads to use

  • --blanket-message-policy <BLANKET_MESSAGE_POLICY> — The policy for handling incoming messages

    Default value: accept

    Possible values:

    • accept: Automatically accept all incoming messages. Reject them only if execution fails
    • reject: Automatically reject tracked messages, ignore or skip untracked messages, but accept protected ones
    • ignore: Don't include any messages in blocks, and don't make any decision whether to accept or reject

  • --restrict-chain-ids-to <RESTRICT_CHAIN_IDS_TO> — A set of chains to restrict incoming messages from. By default, messages from all chains are accepted. To reject messages from all chains, specify an empty string

linera transfer

Transfer funds

Usage: linera transfer [OPTIONS] --from <SENDER> --to <RECIPIENT> <AMOUNT>

Arguments:
  • <AMOUNT> — Amount to transfer
Options:
  • --from <SENDER> — Sending chain ID (must be one of our chains)
  • --to <RECIPIENT> — Recipient account
  • --data <USER_DATA> — User Data (should be a string whose bytes are at most 32 in length)

linera open-chain

Open (i.e. activate) a new chain deriving the UID from an existing one

Usage: linera open-chain [OPTIONS]

Options:

  • --from <CHAIN_ID> — Chain ID (must be one of our chains)

  • --to-public-key <PUBLIC_KEY> — Public key of the new owner (otherwise create a key pair and remember it)

  • --initial-balance <BALANCE> — The initial balance of the new chain. This is subtracted from the parent chain's balance

    Default value: 0

linera open-multi-owner-chain

Open (i.e. activate) a new multi-owner chain deriving the UID from an existing one

Usage: linera open-multi-owner-chain [OPTIONS]

Options:

  • --from <CHAIN_ID> — Chain ID (must be one of our chains)

  • --super-owner-public-keys <SUPER_OWNER_PUBLIC_KEYS> — Public keys of the new super owners

  • --owner-public-keys <OWNER_PUBLIC_KEYS> — Public keys of the new regular owners

  • --owner-weights <OWNER_WEIGHTS> — Weights for the new owners.

    If they are specified there must be exactly one weight for each owner. If no weights are given, every owner will have weight 100.

  • --multi-leader-rounds <MULTI_LEADER_ROUNDS> — The number of rounds in which every owner can propose blocks, i.e. the first round number in which only a single designated leader is allowed to propose blocks

  • --fast-round-ms <FAST_ROUND_DURATION> — The duration of the fast round, in milliseconds

  • --base-timeout-ms <BASE_TIMEOUT> — The duration of the first single-leader and all multi-leader rounds

    Default value: 10000

  • --timeout-increment-ms <TIMEOUT_INCREMENT> — The number of milliseconds by which the timeout increases after each single-leader round

    Default value: 1000

  • --fallback-duration-ms <FALLBACK_DURATION> — The age of an incoming tracked or protected message after which the validators start transitioning the chain to fallback mode, in milliseconds

    Default value: 86400000

  • --execute-operations <EXECUTE_OPERATIONS> — If present, only operations from the specified applications are allowed, and no system operations. Otherwise all operations are allowed

  • --mandatory-applications <MANDATORY_APPLICATIONS> — At least one operation or incoming message from each of these applications must occur in every block

  • --close-chain <CLOSE_CHAIN> — These applications are allowed to close the current chain using the system API

  • --initial-balance <BALANCE> — The initial balance of the new chain. This is subtracted from the parent chain's balance

    Default value: 0

linera change-ownership

Change who owns the chain, and how the owners work together proposing blocks.

Specify the complete set of new owners, by public key. Existing owners that are not included will be removed.

Usage: linera change-ownership [OPTIONS]

Options:

  • --chain-id <CHAIN_ID> — The ID of the chain whose owners will be changed

  • --super-owner-public-keys <SUPER_OWNER_PUBLIC_KEYS> — Public keys of the new super owners

  • --owner-public-keys <OWNER_PUBLIC_KEYS> — Public keys of the new regular owners

  • --owner-weights <OWNER_WEIGHTS> — Weights for the new owners.

    If they are specified there must be exactly one weight for each owner. If no weights are given, every owner will have weight 100.

  • --multi-leader-rounds <MULTI_LEADER_ROUNDS> — The number of rounds in which every owner can propose blocks, i.e. the first round number in which only a single designated leader is allowed to propose blocks

  • --fast-round-ms <FAST_ROUND_DURATION> — The duration of the fast round, in milliseconds

  • --base-timeout-ms <BASE_TIMEOUT> — The duration of the first single-leader and all multi-leader rounds

    Default value: 10000

  • --timeout-increment-ms <TIMEOUT_INCREMENT> — The number of milliseconds by which the timeout increases after each single-leader round

    Default value: 1000

  • --fallback-duration-ms <FALLBACK_DURATION> — The age of an incoming tracked or protected message after which the validators start transitioning the chain to fallback mode, in milliseconds

    Default value: 86400000

linera change-application-permissions

Changes the application permissions configuration

Usage: linera change-application-permissions [OPTIONS]

Options:
  • --chain-id <CHAIN_ID> — The ID of the chain to which the new permissions will be applied
  • --execute-operations <EXECUTE_OPERATIONS> — If present, only operations from the specified applications are allowed, and no system operations. Otherwise all operations are allowed
  • --mandatory-applications <MANDATORY_APPLICATIONS> — At least one operation or incoming message from each of these applications must occur in every block
  • --close-chain <CLOSE_CHAIN> — These applications are allowed to close the current chain using the system API

linera close-chain

Close an existing chain.

A closed chain cannot execute operations or accept messages anymore. It can still reject incoming messages, so they bounce back to the sender.

Usage: linera close-chain --from <CHAIN_ID>

Options:
  • --from <CHAIN_ID> — Chain ID (must be one of our chains)

linera local-balance

Read the current native-token balance of the given account directly from the local state.

NOTE: The local balance does not reflect messages that are waiting to be picked in the local inbox, or that have not been synchronized from validators yet. Use linera sync then either linera query-balance or linera process-inbox && linera local-balance for a consolidated balance.

Usage: linera local-balance [ACCOUNT]

Arguments:
  • <ACCOUNT> — The account to read, written as CHAIN-ID:OWNER or simply CHAIN-ID for the chain balance. By defaults, we read the chain balance of the default chain in the wallet

linera query-balance

Simulate the execution of one block made of pending messages from the local inbox, then read the native-token balance of the account from the local state.

NOTE: The balance does not reflect messages that have not been synchronized from validators yet. Call linera sync first to do so.

Usage: linera query-balance [ACCOUNT]

Arguments:
  • <ACCOUNT> — The account to query, written as CHAIN-ID:OWNER or simply CHAIN-ID for the chain balance. By defaults, we read the chain balance of the default chain in the wallet

linera sync-balance

(DEPRECATED) Synchronize the local state of the chain with a quorum validators, then query the local balance.

This command is deprecated. Use linera sync && linera query-balance instead.

Usage: linera sync-balance [ACCOUNT]

Arguments:
  • <ACCOUNT> — The account to query, written as CHAIN-ID:OWNER or simply CHAIN-ID for the chain balance. By defaults, we read the chain balance of the default chain in the wallet

linera sync

Synchronize the local state of the chain with a quorum validators

Usage: linera sync [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain to synchronize with validators. If omitted, synchronizes the default chain of the wallet

linera process-inbox

Process all pending incoming messages from the inbox of the given chain by creating as many blocks as needed to execute all (non-failing) messages. Failing messages will be marked as rejected and may bounce to their sender depending on their configuration

Usage: linera process-inbox [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain to process. If omitted, uses the default chain of the wallet

linera query-validator

Show the version and genesis config hash of a new validator, and print a warning if it is incompatible

Usage: linera query-validator <ADDRESS>

Arguments:
  • <ADDRESS> — The new validator's address

linera query-validators

Show the current set of validators for a chain

Usage: linera query-validators [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain to query. If omitted, query the default chain of the wallet

linera set-validator

Add or modify a validator (admin only)

Usage: linera set-validator [OPTIONS] --name <NAME> --address <ADDRESS>

Options:

  • --name <NAME> — The public key of the validator

  • --address <ADDRESS> — Network address

  • --votes <VOTES> — Voting power

    Default value: 1

  • --skip-online-check — Skip the version and genesis config checks

linera remove-validator

Remove a validator (admin only)

Usage: linera remove-validator --name <NAME>

Options:
  • --name <NAME> — The public key of the validator

linera resource-control-policy

View or update the resource control policy

Usage: linera resource-control-policy [OPTIONS]

Options:
  • --block <BLOCK> — Set the base price for creating a block
  • --fuel-unit <FUEL_UNIT> — Set the price per unit of fuel
  • --read-operation <READ_OPERATION> — Set the price per read operation
  • --write-operation <WRITE_OPERATION> — Set the price per write operation
  • --byte-read <BYTE_READ> — Set the price per byte read
  • --byte-written <BYTE_WRITTEN> — Set the price per byte written
  • --byte-stored <BYTE_STORED> — Set the price per byte stored
  • --operation <OPERATION> — Set the base price of sending a operation from a block..
  • --operation-byte <OPERATION_BYTE> — Set the additional price for each byte in the argument of a user operation
  • --message <MESSAGE> — Set the base price of sending a message from a block..
  • --message-byte <MESSAGE_BYTE> — Set the additional price for each byte in the argument of a user message
  • --maximum-fuel-per-block <MAXIMUM_FUEL_PER_BLOCK> — Set the maximum amount of fuel per block
  • --maximum-executed-block-size <MAXIMUM_EXECUTED_BLOCK_SIZE> — Set the maximum size of an executed block
  • --maximum-bytes-read-per-block <MAXIMUM_BYTES_READ_PER_BLOCK> — Set the maximum read data per block
  • --maximum-bytes-written-per-block <MAXIMUM_BYTES_WRITTEN_PER_BLOCK> — Set the maximum write data per block

linera create-genesis-config

Create genesis configuration for a Linera deployment. Create initial user chains and print information to be used for initialization of validator setup. This will also create an initial wallet for the owner of the initial "root" chains

Usage: linera create-genesis-config [OPTIONS] --committee <COMMITTEE_CONFIG_PATH> --genesis <GENESIS_CONFIG_PATH> <NUM_OTHER_INITIAL_CHAINS>

Arguments:
  • <NUM_OTHER_INITIAL_CHAINS> — Number of initial (aka "root") chains to create in addition to the admin chain
Options:

  • --committee <COMMITTEE_CONFIG_PATH> — Sets the file describing the public configurations of all validators

  • --genesis <GENESIS_CONFIG_PATH> — The output config path to be consumed by the server

  • --admin-root <ADMIN_ROOT> — Index of the admin chain in the genesis config

    Default value: 0

  • --initial-funding <INITIAL_FUNDING> — Known initial balance of the chain

    Default value: 0

  • --start-timestamp <START_TIMESTAMP> — The start timestamp: no blocks can be created before this time

  • --block-price <BLOCK_PRICE> — Set the base price for creating a block

    Default value: 0

  • --fuel-unit-price <FUEL_UNIT_PRICE> — Set the price per unit of fuel

    Default value: 0

  • --read-operation-price <READ_OPERATION_PRICE> — Set the price per read operation

    Default value: 0

  • --write-operation-price <WRITE_OPERATION_PRICE> — Set the price per write operation

    Default value: 0

  • --byte-read-price <BYTE_READ_PRICE> — Set the price per byte read

    Default value: 0

  • --byte-written-price <BYTE_WRITTEN_PRICE> — Set the price per byte written

    Default value: 0

  • --byte-stored-price <BYTE_STORED_PRICE> — Set the price per byte stored

    Default value: 0

  • --operation-price <OPERATION_PRICE> — Set the base price of sending a operation from a block..

    Default value: 0

  • --operation-byte-price <OPERATION_BYTE_PRICE> — Set the additional price for each byte in the argument of a user operation

    Default value: 0

  • --message-price <MESSAGE_PRICE> — Set the base price of sending a message from a block..

    Default value: 0

  • --message-byte-price <MESSAGE_BYTE_PRICE> — Set the additional price for each byte in the argument of a user message

    Default value: 0

  • --maximum-fuel-per-block <MAXIMUM_FUEL_PER_BLOCK> — Set the maximum amount of fuel per block

  • --maximum-executed-block-size <MAXIMUM_EXECUTED_BLOCK_SIZE> — Set the maximum size of an executed block

  • --maximum-bytes-read-per-block <MAXIMUM_BYTES_READ_PER_BLOCK> — Set the maximum read data per block

  • --maximum-bytes-written-per-block <MAXIMUM_BYTES_WRITTEN_PER_BLOCK> — Set the maximum write data per block

  • --testing-prng-seed <TESTING_PRNG_SEED> — Force this wallet to generate keys using a PRNG and a given seed. USE FOR TESTING ONLY

  • --network-name <NETWORK_NAME> — A unique name to identify this network

linera watch

Watch the network for notifications

Usage: linera watch [OPTIONS] [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain ID to watch
Options:
  • --raw — Show all notifications from all validators

linera service

Run a GraphQL service to explore and extend the chains of the wallet

Usage: linera service [OPTIONS]

Options:

  • --listener-skip-process-inbox — Do not create blocks automatically to receive incoming messages. Instead, wait for an explicit mutation processInbox

  • --listener-delay-before-ms <DELAY_BEFORE_MS> — Wait before processing any notification (useful for testing)

    Default value: 0

  • --listener-delay-after-ms <DELAY_AFTER_MS> — Wait after processing any notification (useful for rate limiting)

    Default value: 0

  • --port <PORT> — The port on which to run the server

    Default value: 8080

linera faucet

Run a GraphQL service that exposes a faucet where users can claim tokens. This gives away the chain's tokens, and is mainly intended for testing

Usage: linera faucet [OPTIONS] --amount <AMOUNT> [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain that gives away its tokens
Options:

  • --port <PORT> — The port on which to run the server

    Default value: 8080

  • --amount <AMOUNT> — The number of tokens to send to each new chain

  • --limit-rate-until <LIMIT_RATE_UNTIL> — The end timestamp: The faucet will rate-limit the token supply so it runs out of money no earlier than this

linera publish-bytecode

Publish bytecode

Usage: linera publish-bytecode <CONTRACT> <SERVICE> [PUBLISHER]

Arguments:
  • <CONTRACT> — Path to the Wasm file for the application "contract" bytecode
  • <SERVICE> — Path to the Wasm file for the application "service" bytecode
  • <PUBLISHER> — An optional chain ID to publish the bytecode. The default chain of the wallet is used otherwise

linera publish-data-blob

Publish a data blob of binary data

Usage: linera publish-data-blob <BLOB_PATH> [PUBLISHER]

Arguments:
  • <BLOB_PATH> — Path to data blob file to be published
  • <PUBLISHER> — An optional chain ID to publish the blob. The default chain of the wallet is used otherwise

linera read-data-blob

Verify that a data blob is readable

Usage: linera read-data-blob <HASH> [READER]

Arguments:
  • <HASH> — The hash of the content
  • <READER> — An optional chain ID to verify the blob. The default chain of the wallet is used otherwise

linera create-application

Create an application

Usage: linera create-application [OPTIONS] <BYTECODE_ID> [CREATOR]

Arguments:
  • <BYTECODE_ID> — The bytecode ID of the application to create
  • <CREATOR> — An optional chain ID to host the application. The default chain of the wallet is used otherwise
Options:
  • --json-parameters <JSON_PARAMETERS> — The shared parameters as JSON string
  • --json-parameters-path <JSON_PARAMETERS_PATH> — Path to a JSON file containing the shared parameters
  • --json-argument <JSON_ARGUMENT> — The instantiation argument as a JSON string
  • --json-argument-path <JSON_ARGUMENT_PATH> — Path to a JSON file containing the instantiation argument
  • --required-application-ids <REQUIRED_APPLICATION_IDS> — The list of required dependencies of application, if any

linera publish-and-create

Create an application, and publish the required bytecode

Usage: linera publish-and-create [OPTIONS] <CONTRACT> <SERVICE> [PUBLISHER]

Arguments:
  • <CONTRACT> — Path to the Wasm file for the application "contract" bytecode
  • <SERVICE> — Path to the Wasm file for the application "service" bytecode
  • <PUBLISHER> — An optional chain ID to publish the bytecode. The default chain of the wallet is used otherwise
Options:
  • --json-parameters <JSON_PARAMETERS> — The shared parameters as JSON string
  • --json-parameters-path <JSON_PARAMETERS_PATH> — Path to a JSON file containing the shared parameters
  • --json-argument <JSON_ARGUMENT> — The instantiation argument as a JSON string
  • --json-argument-path <JSON_ARGUMENT_PATH> — Path to a JSON file containing the instantiation argument
  • --required-application-ids <REQUIRED_APPLICATION_IDS> — The list of required dependencies of application, if any

linera request-application

Request an application from another chain, so it can be used on this one

Usage: linera request-application [OPTIONS] <APPLICATION_ID>

Arguments:
  • <APPLICATION_ID> — The ID of the application to request
Options:
  • --target-chain-id <TARGET_CHAIN_ID> — The target chain on which the application is already registered. If not specified, the chain on which the application was created is used
  • --requester-chain-id <REQUESTER_CHAIN_ID> — The owned chain on which the application is missing

linera keygen

Create an unassigned key-pair

Usage: linera keygen

linera assign

Link a key owned by the wallet to a chain that was just created for that key

Usage: linera assign --key <KEY> --message-id <MESSAGE_ID>

Options:
  • --key <KEY> — The public key to assign
  • --message-id <MESSAGE_ID> — The ID of the message that created the chain. (This uniquely describes the chain and where it was created.)

linera retry-pending-block

Retry a block we unsuccessfully tried to propose earlier.

As long as a block is pending most other commands will fail, since it is unsafe to propose multiple blocks at the same height.

Usage: linera retry-pending-block [CHAIN_ID]

Arguments:
  • <CHAIN_ID> — The chain with the pending block. If not specified, the wallet's default chain is used

linera wallet

Show the contents of the wallet

Usage: linera wallet <COMMAND>

Subcommands:
  • show — Show the contents of the wallet
  • set-default — Change the wallet default chain
  • init — Initialize a wallet from the genesis configuration
  • forget-keys — Forgets the specified chain's keys
  • forget-chain — Forgets the specified chain, including the associated key pair

linera wallet show

Show the contents of the wallet

Usage: linera wallet show [CHAIN_ID]

Arguments:
  • <CHAIN_ID>

linera wallet set-default

Change the wallet default chain

Usage: linera wallet set-default <CHAIN_ID>

Arguments:
  • <CHAIN_ID>

linera wallet init

Initialize a wallet from the genesis configuration

Usage: linera wallet init [OPTIONS]

Options:
  • --genesis <GENESIS_CONFIG_PATH> — The path to the genesis configuration for a Linera deployment. Either this or --faucet must be specified
  • --faucet <FAUCET> — The address of a faucet
  • --with-new-chain — Request a new chain from the faucet, credited with tokens. This requires --faucet
  • --with-other-chains <WITH_OTHER_CHAINS> — Other chains to follow
  • --testing-prng-seed <TESTING_PRNG_SEED> — Force this wallet to generate keys using a PRNG and a given seed. USE FOR TESTING ONLY

linera wallet forget-keys

Forgets the specified chain's keys

Usage: linera wallet forget-keys <CHAIN_ID>

Arguments:
  • <CHAIN_ID>

linera wallet forget-chain

Forgets the specified chain, including the associated key pair

Usage: linera wallet forget-chain <CHAIN_ID>

Arguments:
  • <CHAIN_ID>

linera project

Manage Linera projects

Usage: linera project <COMMAND>

Subcommands:
  • new — Create a new Linera project
  • test — Test a Linera project
  • publish-and-create — Build and publish a Linera project

linera project new

Create a new Linera project

Usage: linera project new [OPTIONS] <NAME>

Arguments:
  • <NAME> — The project name. A directory of the same name will be created in the current directory
Options:
  • --linera-root <LINERA_ROOT> — Use the given clone of the Linera repository instead of remote crates

linera project test

Test a Linera project.

Equivalent to running cargo test with the appropriate test runner.

Usage: linera project test [PATH]

Arguments:
  • <PATH>

linera project publish-and-create

Build and publish a Linera project

Usage: linera project publish-and-create [OPTIONS] [PATH] [NAME] [PUBLISHER]

Arguments:

  • <PATH> — The path of the root of the Linera project. Defaults to current working directory if unspecified

  • <NAME> — Specify the name of the Linera project. This is used to locate the generated bytecode. The generated bytecode should be of the form <name>_{contract,service}.wasm.

    Defaults to the package name in Cargo.toml, with dashes replaced by underscores.

  • <PUBLISHER> — An optional chain ID to publish the bytecode. The default chain of the wallet is used otherwise

Options:
  • --json-parameters <JSON_PARAMETERS> — The shared parameters as JSON string
  • --json-parameters-path <JSON_PARAMETERS_PATH> — Path to a JSON file containing the shared parameters
  • --json-argument <JSON_ARGUMENT> — The instantiation argument as a JSON string
  • --json-argument-path <JSON_ARGUMENT_PATH> — Path to a JSON file containing the instantiation argument
  • --required-application-ids <REQUIRED_APPLICATION_IDS> — The list of required dependencies of application, if any

linera net

Manage a local Linera Network

Usage: linera net <COMMAND>

Subcommands:
  • up — Start a Local Linera Network
  • helper — Print a bash helper script to make linera net up easier to use. The script is meant to be installed in ~/.bash_profile or sourced when needed

linera net up

Start a Local Linera Network

Usage: linera net up [OPTIONS]

Options:

  • --extra-wallets <EXTRA_WALLETS> — The number of extra wallets and user chains to initialise. Default is 0

  • --other-initial-chains <OTHER_INITIAL_CHAINS> — The number of initial "root" chains created in the genesis config on top of the default "admin" chain. All initial chains belong to the first "admin" wallet

    Default value: 10

  • --initial-amount <INITIAL_AMOUNT> — The initial amount of native tokens credited in the initial "root" chains, including the default "admin" chain

    Default value: 1000000

  • --validators <VALIDATORS> — The number of validators in the local test network. Default is 1

    Default value: 1

  • --shards <SHARDS> — The number of shards per validator in the local test network. Default is 1

    Default value: 1

  • --policy-config <POLICY_CONFIG> — Configure the resource control policy (notably fees) according to pre-defined settings

    Default value: default

    Possible values: default, only-fuel, fuel-and-block, all-categories, devnet

  • --testing-prng-seed <TESTING_PRNG_SEED> — Force this wallet to generate keys using a PRNG and a given seed. USE FOR TESTING ONLY

  • --path <PATH> — Run with a specific path where the wallet and validator input files are. If none, then a temporary directory is created

  • --storage-config-namespace <STORAGE_CONFIG_NAMESPACE> — Run with a specific storage. If none, then a linera-storage-service is spanned on a random free port

linera net helper

Print a bash helper script to make linera net up easier to use. The script is meant to be installed in ~/.bash_profile or sourced when needed

Usage: linera net helper

This document was generated automatically by clap-markdown.