| sidebar | permalink | keywords | summary |
|---|---|---|---|
sidebar |
concept_san_provision_overview.html |
netapp, ontap, SAN, provision, provisioning, overview, iSCSI protocol, FC protocol, FCP, storage, LUN, initiator group, igroup, FC host WWp, host node name, FC switch, host-side adapter, world-wide port name, Ethernet network adapter, NIC, TCP offload engine, TOE card, software initiator, converged network adapter, CNA, HBA, host bust adapter, iSCSI qualified name, IQN |
You can use the iSCSI and FC protocols to provide storage in a SAN environment with System Manager. |
The topics in this section show you how to configure and manage SAN environments with System Manager in ONTAP 9.7 and later releases.
If you are using the classic System Manager (available only in ONTAP 9.7 and earlier), see these topics:
You can use the iSCSI and FC protocols to provide storage in a SAN environment.
With iSCSI and FC, storage targets are called LUNs (logical units) and are presented to hosts as standard block devices. You create LUNs and then map them to initiator groups (igroups). Initiator groups are tables of FC host WWPs and iSCSI host node names and control which initiators have access to which LUNs.
FC targets connect to the network through FC switches and host-side adapters and are identified by world-wide port names (WWPNs). iSCSI targets connect to the network through standard Ethernet network adapters (NICs), TCP offload engine (TOE) cards with software initiators, converged network adapters (CNAs) or dedicated host bust adapters (HBAs) and are identified by iSCSI qualified names (IQNs).