info.md

Home Assistant Ultimaker printers

Adds support for the following ultimaker printer sensors:

• Printer status
• Print job state
• Print job progress
• Hotend id (AA 0.4, BB 0.4, ...)
• Hotend temperature
• Hotend target temperature
• Bed type (glass, ...)
• Bed temperature
• Bed target temperature

{% if installed %}

Changes as compared to your installed version:

Features

{% if version_installed.replace("v", "").replace("V", "").replace(".","") | int < 14 %}

• Added bed_type
• Added hotend_1_id
• Added hotend_2_id {% endif %} {% if version_installed.replace("v", "").replace("V", "").replace(".","") | int < 15 %}
• Support from Python 3.8 and higher
• Support Home Assistant OS 5.4.99 and higher {% endif %}

Bugfixes

{% else %}

Usage

Add the Ultimaker platform to your sensors in configuration.yaml

sensor:
  - platform: ultimaker
    name: name
    host: ip_adress
    scan_interval: 10  # optional, default 10
    decimal: 2  # optional, default 2 rounds the sensor values
    sensors:
      - status
      - state
      - progress
      - bed_type
      - bed_temperature
      - bed_temperature_target
      - hotend_1_id
      - hotend_1_temperature
      - hotend_1_temperature_target
      - hotend_2_id
      - hotend_2_temperature
      - hotend_2_temperature_target

Camera

Define a generic camera in the configuration.yaml

camera:
  - platform: generic
    still_image_url: http://ip_adress:8080/?action=snapshot
    framerate: 4

Lovelace card

Add a lovelace card to the UI, replace printername with the name you specified in your configuration.yaml

type: vertical-stack
cards:
  - type: entity
    entity: sensor.printername_print_job_state
  - type: conditional
    conditions:
      - entity: sensor.printername_printer_status
        state: printing
    card:
      type: picture-entity
      entity: sensor.printername_print_job_progress
      camera_image: camera.generic_camera
      camera_view: live
  - type: gauge
    entity: sensor.printername_print_job_progress
    min: 0
    max: 100
    severity:
      green: 66
      yellow: 33
      red: 0

{% endif %}