[Connect Tech] - [CCG020] - [Mini Carrier Board]

[Elio75]

Description	Carrier Board for COM-Express Type10, Connecttech CCG020
Datasheet component	CCG020
Project	ergoCub
Alias Creo	CONNECTTECH_CCG020
IIT-Code	15301
Applicant	@Elio75
Supervisor	@fiorisi
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

CTI-X-COM-Express-Type-10-mini (1).pdf

Notes:

Checklist:

Complete the checklist in order to proceed with the request.

• Created the Alias following the standard convention.
• Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
• File imported using the Creo start part commercial.
• Checked mass properties.
• Checked if one special case applies to this component.
• Converted the files with the EDU-COM license.
• Created IIT code in WINGST with manufacturer and at least one supplier.

[fiorisi]

@Elio75 can you add the missing parameters (IIT code if available)?

The file is too heavy, there are many details that we don't need. Is there a lightweight version?

[Elio75]

Done

[Elio75]

The file is too heavy, there are many details that we don't need. Is there a lightweight version?

ho fatto uno Shrinkwrap

@fiorisi

[marcellosavoldi]

I would like to propose making a shrinkwrap for the complete board as surfaces and to solidify the PCB only.
ould this decrease the weights?
So I wish the board had the MATE_CONN as described about the individual components here, at least for the components used ...
What do you think?

@Elio75
cc @fiorisi

[fiorisi]

I would like to propose making a shrinkwrap for the complete board as surfaces and to solidify the PCB only.
ould this decrease the weights?
So I wish the board had the MATE_CONN as described about the individual components here, at least for the components used ...
What do you think?

Can you do it for this board and attach the file here so we have a look at the final result?

[marcellosavoldi]

pcb_sw0001.prt.zip

without MATE_CONN SYS...

@fiorisi , @Elio75

[fiorisi]

Thanks @marcellosavoldi.
The size of the file is more or less the same though.

I did a test by manually removing the small features, but still the size is 11 Mb
test_delete_small_features.prt.1.zip

If we don't find a simple way I would keep the source file if the file is no greater than 20 Mb.

What do you think?

[marcellosavoldi]

could we try to reduce the number of surfaces (in the connectors for example) before doing the shrinkwrap?

[fiorisi]

@elio could you try to reduce the size of the file as suggested? Then please upload the file here.