Skip to content

Latest commit

 

History

History
60 lines (37 loc) · 3.04 KB

firmware_en.md

File metadata and controls

60 lines (37 loc) · 3.04 KB

Firmware

This is the Corne v4(rev4) firmware guide.

Flash the firmware

Please check the pcb version v4.0.0 or v4.1.0 first.
After that, download the firmware of VIA/Vial from below.

standard (3x6) v4.0.0

mini (3x5) v4.0.0

standard (3x6) v4.1.0

mini (3x5) v4.1.0

Connect to the PC while holding down the BOOT button, or while connected to the PC, hold down the BOOT button and press the RESET button. After that, an RPI-PR2 device will be mounted.

btn

Drop the downloaded uf2 file into the RPI-PR2 device to complete flash.

flash

Once the firmware has been written to one side, follow the same procedure for the other side.

(Optional) If you build the firmware yourself

Please refer to https://github.com/foostan/kbd_firmware.

Change your keymap

VIA

VIA can be used by flashing the firmware for VIA.
If you use Corne v4, please download json file from bellow and load at VIA(You need to enable Design tab at the config page)

enable_design_tab load_json loaded_json

Vial

Vial can be used by flashing the firmware for Vial.

Vial