Skip to content

Latest commit

 

History

History
81 lines (48 loc) · 5.21 KB

walkthrough.md

File metadata and controls

81 lines (48 loc) · 5.21 KB
Raw

Getting Started With The HTTP Add On

After you've installed KEDA and the HTTP Add On (this project, we'll call it the "add on" for short), this document will show you how to get started with an example app.

If you haven't installed KEDA and the HTTP Add On (this project), please do so first. Follow instructions install.md to complete your installation.

Before you continue, make sure that you have your NAMESPACE environment variable set to the same value as it was when you installed.

Creating An Application

You'll need to install a Deployment and Service first. You'll tell the add on to begin scaling it up and down after this step. We've provided a Helm chart in this repository that you can use to try it out. Use this command to create the resources you need.

helm install xkcd ./examples/xkcd -n ${NAMESPACE}

You'll need to clone the repository to get access to this chart. If you have your own Deployment and Service installed, you can go right to creating an HTTPScaledObject in the next section.

If you are running KEDA and the HTTP Addon in cluster-global mode, you can install the XKCD chart in any namespace you choose. If you do so, make sure you add --set ingressNamespace=${NAMESPACE} to the above installation command.

To remove the app, run helm delete xkcd -n ${NAMESPACE}

Creating an HTTPScaledObject

You interact with the operator via a CRD called HTTPScaledObject. This CRD object points the To get an example app up and running, read the notes below and then run the subsequent command from the root of this repository.

kubectl create -f -n $NAMESPACE examples/v0.0.2/httpscaledobject.yaml

If you'd like to learn more about this object, please see the HTTPScaledObject reference.

Testing Your Installation

You've now installed a web application and activated autoscaling by creating an HTTPScaledObject for it. For autoscaling to work properly, HTTP traffic needs to route through the Service that the add on has set up. You can use kubectl port-forward to quickly test things out:

kubectl port-forward svc/keda-add-ons-http-interceptor-proxy -n ${NAMESPACE} 8080:80

Routing to the Right Service

As said above, you need to route your HTTP traffic to the Service that the add on has created. If you have existing systems - like an ingress controller - you'll need to anticipate the name of these created Services. Each one will be named consistently like so, in the same namespace as the HTTPScaledObject and your application (i.e. $NAMESPACE):

keda-add-ons-http-interceptor-proxy

This is installed by the Helm chart as a ClusterIP Service by default.

Installing and Using the ingress-nginx Ingress Controller

As mentioned above, the Service that the add-on creates will be inaccessible over the network from outside of your Kubernetes cluster.

While you can access it via the kubectl port-forward command above, we recommend against using that in a production setting. Instead, we recommend that you use an ingress controller to route to the interceptor service. This section describes how to set up and use the NGINX Ingress controller.

First, install the controller using the commands below. These commands use Helm v3. For other installation methods, see the installation page.

helm repo add ingress-nginx https://kubernetes.github.io/ingress-nginx
helm repo update
helm install ingress-nginx ingress-nginx/ingress-nginx -n ${NAMESPACE}

An Ingress resource was already created as part of the xkcd chart, so the installed NGINX ingress controller will initialize, detect the Ingress, and begin routing to the xkcd interceptor Service.

When you're ready, please run kubectl get svc -n ${NAMESPACE}, find the ingress-nginx-controller service, and copy and paste its EXTERNAL-IP. This is the IP address that your application will be running at on the public internet.

Note: you should go further and set your DNS records appropriately and set up a TLS certificate for this IP address. Instructions to do that are out of scope of this document, though.

Making an HTTP Request to your App

Now that you have your application running and your ingress configured, you can issue an HTTP request. To do so, you'll need to know the IP address to request. If you're using an ingress controller, that is the IP of the ingress controller's Service. If you're using a "raw" Service with type: LoadBalancer, that is the IP address of the Service itself.

Regardless, you can use the below curl command to make a request to your application:

curl -H "Host: myhost.com" <Your IP>

Note the -H flag above to specify the Host header. This is needed to tell the interceptor how to route the request. If you have a DNS name set up for the IP, you don't need this header.