From 65a0d6bae882620c51cb7e1babc7a5d3c46832d2 Mon Sep 17 00:00:00 2001 From: Lemon1151 Date: Sun, 30 Jun 2024 21:53:46 +0800 Subject: [PATCH 1/4] To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level --- .../add-board-fine3399-dts.patch | 106 +++++++++++++++--- 1 file changed, 90 insertions(+), 16 deletions(-) diff --git a/patch/u-boot/u-boot-rockchip64/add-board-fine3399-dts.patch b/patch/u-boot/u-boot-rockchip64/add-board-fine3399-dts.patch index 6e74945196f9..7b7b4d8edfa2 100644 --- a/patch/u-boot/u-boot-rockchip64/add-board-fine3399-dts.patch +++ b/patch/u-boot/u-boot-rockchip64/add-board-fine3399-dts.patch @@ -118,7 +118,7 @@ diff --git a/arch/arm/dts/rk3399-fine3399.dts b/arch/arm/dts/rk3399-fine3399.dts new file mode 100644 --- /dev/null +++ b/arch/arm/dts/rk3399-fine3399.dts -@@ -0,0 +1,797 @@ +@@ -0,0 +1,871 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; @@ -250,7 +250,7 @@ new file mode 100644 + + fan0: pwm-fan { + compatible = "pwm-fan"; -+ cooling-levels = <0 150 200 255>; ++ cooling-levels = <0 30 60 90 120 160>; + #cooling-cells = <2>; + fan-supply = <&vcc_sys>; + pwms = <&pwm1 0 40000 0>; @@ -278,6 +278,14 @@ new file mode 100644 + }; + }; + ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ brightness-levels = <0 4 8 16 32 64 128 255>; ++ default-brightness-level = <5>; ++ pwms = <&pwm0 0 1000000 0>; ++ status = "okay"; ++ }; ++ +}; + +&cpu_l0 { @@ -311,18 +319,28 @@ new file mode 100644 + +&cpu_thermal { + trips { ++ cpu_warm: cpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ + cpu_hot: cpu_hot { -+ hysteresis = <10000>; -+ temperature = <55000>; ++ temperature = <65000>; ++ hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { -+ cooling-device = -+ <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; ++ trip = <&cpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map3 { + trip = <&cpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; + }; + }; +}; @@ -347,6 +365,39 @@ new file mode 100644 + status = "okay"; +}; + ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&gpu_thermal { ++ trips { ++ gpu_warm: gpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ ++ gpu_hot: gpu_hot { ++ temperature = <65000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ ++ cooling-maps { ++ map1 { ++ trip = <&gpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map2 { ++ trip = <&gpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; ++ }; ++ }; ++}; ++ +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; @@ -657,6 +708,22 @@ new file mode 100644 + }; + }; + ++ spi2 { ++ spi2_cs0: spi2-cs0 { ++ rockchip,pins = ++ <2 RK_PB4 2 &pcfg_pull_up>; ++ }; ++ }; ++ ++ display_pin:display-pin { ++ DC_pin: dc-pin { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ reset_pin: reset-pin { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -697,12 +764,12 @@ new file mode 100644 + }; + }; +}; -+/* ++ +// TFT +&pwm0 { + status = "okay"; +}; -+*/ ++ +// FAN +&pwm1 { + status = "okay"; @@ -779,25 +846,32 @@ new file mode 100644 + }; +}; +*/ -+/* ++ +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_cs0>; + -+ panel@0 { -+ compatible = "sitronix,st7789v"; ++ st7735r@0 { ++ status = "okay"; ++ compatible = "sitronix,st7735r"; + reg = <0>; -+ // backlight = <&pwm0>; ++ rgb; ++ rotate = <270>; ++ width = <80>; ++ height = <160>; ++ fps = <30>; ++ buswidth = <8>; ++ backlight = <&backlight>; + dc-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + led-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; -+ spi-max-frequency = <15000000>; -+ spi-cs-high; -+ status = "okay"; ++ spi-max-frequency = <32000000>; ++ spi-cpol; ++ spi-cpha; + }; +}; -+*/ ++ +&tcphy0 { + status = "okay"; +}; From 60a989ec5be651e3a7ea94b477a3316691ced1cc Mon Sep 17 00:00:00 2001 From: Lemon1151 Date: Sun, 30 Jun 2024 21:54:30 +0800 Subject: [PATCH 2/4] To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level --- .../add-board-fine3399-dts.patch | 106 +++++++++++++++--- 1 file changed, 90 insertions(+), 16 deletions(-) diff --git a/patch/kernel/archive/rockchip64-6.6/add-board-fine3399-dts.patch b/patch/kernel/archive/rockchip64-6.6/add-board-fine3399-dts.patch index e2eb19924fe1..e4f6ac366906 100644 --- a/patch/kernel/archive/rockchip64-6.6/add-board-fine3399-dts.patch +++ b/patch/kernel/archive/rockchip64-6.6/add-board-fine3399-dts.patch @@ -2,7 +2,7 @@ diff --git a/arch/arm64/boot/dts/rockchip/rk3399-fine3399.dts b/arch/arm64/boot/ new file mode 100644 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-fine3399.dts -@@ -0,0 +1,797 @@ +@@ -0,0 +1,871 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; @@ -134,7 +134,7 @@ new file mode 100644 + + fan0: pwm-fan { + compatible = "pwm-fan"; -+ cooling-levels = <0 150 200 255>; ++ cooling-levels = <0 30 60 90 120 160>; + #cooling-cells = <2>; + fan-supply = <&vcc_sys>; + pwms = <&pwm1 0 40000 0>; @@ -162,6 +162,14 @@ new file mode 100644 + }; + }; + ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ brightness-levels = <0 4 8 16 32 64 128 255>; ++ default-brightness-level = <5>; ++ pwms = <&pwm0 0 1000000 0>; ++ status = "okay"; ++ }; ++ +}; + +&cpu_l0 { @@ -195,18 +203,28 @@ new file mode 100644 + +&cpu_thermal { + trips { ++ cpu_warm: cpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ + cpu_hot: cpu_hot { -+ hysteresis = <10000>; -+ temperature = <55000>; ++ temperature = <65000>; ++ hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { -+ cooling-device = -+ <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; ++ trip = <&cpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map3 { + trip = <&cpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; + }; + }; +}; @@ -231,6 +249,39 @@ new file mode 100644 + status = "okay"; +}; + ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&gpu_thermal { ++ trips { ++ gpu_warm: gpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ ++ gpu_hot: gpu_hot { ++ temperature = <65000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ ++ cooling-maps { ++ map1 { ++ trip = <&gpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map2 { ++ trip = <&gpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; ++ }; ++ }; ++}; ++ +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; @@ -541,6 +592,22 @@ new file mode 100644 + }; + }; + ++ spi2 { ++ spi2_cs0: spi2-cs0 { ++ rockchip,pins = ++ <2 RK_PB4 2 &pcfg_pull_up>; ++ }; ++ }; ++ ++ display_pin:display-pin { ++ DC_pin: dc-pin { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ reset_pin: reset-pin { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -581,12 +648,12 @@ new file mode 100644 + }; + }; +}; -+/* ++ +// TFT +&pwm0 { + status = "okay"; +}; -+*/ ++ +// FAN +&pwm1 { + status = "okay"; @@ -663,25 +730,32 @@ new file mode 100644 + }; +}; +*/ -+/* ++ +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_cs0>; + -+ panel@0 { -+ compatible = "sitronix,st7789v"; ++ st7735r@0 { ++ status = "okay"; ++ compatible = "sitronix,st7735r"; + reg = <0>; -+ // backlight = <&pwm0>; ++ rgb; ++ rotate = <270>; ++ width = <80>; ++ height = <160>; ++ fps = <30>; ++ buswidth = <8>; ++ backlight = <&backlight>; + dc-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + led-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; -+ spi-max-frequency = <15000000>; -+ spi-cs-high; -+ status = "okay"; ++ spi-max-frequency = <32000000>; ++ spi-cpol; ++ spi-cpha; + }; +}; -+*/ ++ +&tcphy0 { + status = "okay"; +}; From afa806659d488e9a0bf80267436fbb455e21770a Mon Sep 17 00:00:00 2001 From: Lemon1151 Date: Sun, 30 Jun 2024 21:55:30 +0800 Subject: [PATCH 3/4] Integrating support for fine3399 boards into the rockchip64-6.9 kernel --- .../add-board-fine3399-dts.patch | 876 ++++++++++++++++++ 1 file changed, 876 insertions(+) create mode 100644 patch/kernel/archive/rockchip64-6.9/add-board-fine3399-dts.patch diff --git a/patch/kernel/archive/rockchip64-6.9/add-board-fine3399-dts.patch b/patch/kernel/archive/rockchip64-6.9/add-board-fine3399-dts.patch new file mode 100644 index 000000000000..e4f6ac366906 --- /dev/null +++ b/patch/kernel/archive/rockchip64-6.9/add-board-fine3399-dts.patch @@ -0,0 +1,876 @@ +diff --git a/arch/arm64/boot/dts/rockchip/rk3399-fine3399.dts b/arch/arm64/boot/dts/rockchip/rk3399-fine3399.dts +new file mode 100644 +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3399-fine3399.dts +@@ -0,0 +1,871 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++#include ++#include ++#include ++#include "rk3399.dtsi" ++#include "rk3399-opp.dtsi" ++ ++ ++/ { ++ model = "Rockchip Fine3399"; ++ compatible = "rockchip,fine3399", "rockchip,rk3399"; ++ ++ aliases { ++ mmc0 = &sdio0; ++ mmc1 = &sdmmc; ++ mmc2 = &sdhci; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ clkin_gmac: external-gmac-clock { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "clkin_gmac"; ++ #clock-cells = <0>; ++ }; ++ ++ dc_12v: dc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "dc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ }; ++ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk808 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_reg_on_h>; ++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; // bsp ++ }; ++ ++ /* switched by pmic_sleep */ ++ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v8_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc_1v8>; ++ }; ++ ++ vcc3v3_sys: vcc3v3_pcie: vcc3v3_bl: vcc3v3-sys { // sch ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&dc_12v>; ++ }; ++ ++ vcc_sys: vcc-sys { // sch ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&dc_12v>; ++ }; ++ ++ vcc_phy: vcc-phy-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc_phy_h>; ++ regulator-name = "vcc_phy"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ vdd_log: vdd-log { ++ compatible = "pwm-regulator"; ++ pwms = <&pwm2 0 25000 1>; ++ regulator-name = "vdd_log"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1400000>; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ leds: gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&user_led2>; ++ ++ user_led2 { ++ label = "blue:work_led"; ++ gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; // sch ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ autorepeat; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&power_key>; ++ ++ power { ++ debounce-interval = <100>; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; // bsp ++ label = "GPIO Key Power"; ++ linux,code = ; ++ wakeup-source; ++ }; ++ }; ++ ++ fan0: pwm-fan { ++ compatible = "pwm-fan"; ++ cooling-levels = <0 30 60 90 120 160>; ++ #cooling-cells = <2>; ++ fan-supply = <&vcc_sys>; ++ pwms = <&pwm1 0 40000 0>; ++ }; ++ ++ // pwm3 ++ ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir_int>; ++ }; ++ ++ adc-keys { ++ compatible = "adc-keys"; ++ io-channels = <&saradc 1>; ++ io-channel-names = "buttons"; ++ keyup-threshold-microvolt = <1750000>; ++ poll-interval = <100>; ++ ++ recovery { ++ label = "Recovery"; ++ linux,code = ; // ?? ++ press-threshold-microvolt = <0>; ++ }; ++ }; ++ ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ brightness-levels = <0 4 8 16 32 64 128 255>; ++ default-brightness-level = <5>; ++ pwms = <&pwm0 0 1000000 0>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&cpu_thermal { ++ trips { ++ cpu_warm: cpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ ++ cpu_hot: cpu_hot { ++ temperature = <65000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ ++ cooling-maps { ++ map2 { ++ trip = <&cpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map3 { ++ trip = <&cpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; ++ }; ++ }; ++}; ++ ++&emmc_phy { ++ status = "okay"; ++}; ++ ++&gmac { ++ assigned-clocks = <&cru SCLK_RMII_SRC>; ++ assigned-clock-parents = <&clkin_gmac>; ++ clock_in_out = "input"; ++ phy-supply = <&vcc_phy>; ++ phy-mode = "rgmii"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; // bsp ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; ++ tx_delay = <0x28>; ++ rx_delay = <0x11>; ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&gpu_thermal { ++ trips { ++ gpu_warm: gpu_warm { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ ++ gpu_hot: gpu_hot { ++ temperature = <65000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ ++ cooling-maps { ++ map1 { ++ trip = <&gpu_warm>; ++ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; ++ }; ++ ++ map2 { ++ trip = <&gpu_hot>; ++ cooling-device = <&fan0 4 THERMAL_NO_LIMIT>; ++ }; ++ }; ++}; ++ ++&hdmi { ++ ddc-i2c-bus = <&i2c3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hdmi_cec>; ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ clock-frequency = <400000>; ++ i2c-scl-rising-time-ns = <168>; ++ i2c-scl-falling-time-ns = <4>; ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ interrupt-parent = <&gpio1>; ++ interrupts = ; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l &pmic_dvs2>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ vcc10-supply = <&vcc3v3_sys>; ++ vcc11-supply = <&vcc3v3_sys>; ++ vcc12-supply = <&vcc3v3_sys>; ++ vddio-supply = <&vcc1v8_pmu>; ++ ++ regulators { ++ vdd_center: DCDC_REG1 { ++ regulator-name = "vdd_center"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_l: DCDC_REG2 { ++ regulator-name = "vdd_cpu_l"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG4 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc1v8_dvp: LDO_REG1 { ++ regulator-name = "vcc1v8_dvp"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v0_tp: LDO_REG2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-name = "vcc3v0_tp"; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc1v8_pmu: LDO_REG3 { ++ regulator-name = "vcc1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_sd: LDO_REG4 { ++ regulator-name = "vcc_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcca3v0_codec: LDO_REG5 { ++ regulator-name = "vcca3v0_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v5: LDO_REG6 { ++ regulator-name = "vcc_1v5"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1500000>; ++ }; ++ }; ++ ++ vcca1v8_codec: LDO_REG7 { ++ regulator-name = "vcca1v8_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v0: LDO_REG8 { ++ regulator-name = "vcc_3v0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc3v3_s3: SWITCH_REG1 { ++ regulator-name = "vcc3v3_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_s0: SWITCH_REG2 { ++ regulator-name = "vcc3v3_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++ ++ vdd_cpu_b: regulator@40 { ++ compatible = "silergy,syr827"; ++ reg = <0x40>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&cpu_b_sleep>; ++ regulator-name = "vdd_cpu_b"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ vin-supply = <&vcc_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: regulator@41 { ++ compatible = "silergy,syr828"; ++ reg = <0x41>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gpu_sleep>; ++ regulator-name = "vdd_gpu"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ vin-supply = <&vcc_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++// Used for HDMI ++&i2c3 { ++ i2c-scl-rising-time-ns = <450>; ++ i2c-scl-falling-time-ns = <15>; ++ status = "okay"; ++}; ++ ++// HDMI sound ++&i2s2 { ++ #sound-dai-cells = <0>; ++ status = "okay"; ++}; ++ ++&io_domains { ++ status = "okay"; ++ ++ bt656-supply = <&vcc_3v0>; ++ audio-supply = <&vcca1v8_codec>; ++ sdmmc-supply = <&vcc_sd>; ++ gpio1830-supply = <&vcc_3v0>; ++}; ++ ++&pmu_io_domains { ++ status = "okay"; ++ pmu1830-supply = <&vcc_1v8>; ++}; ++ ++&pcie_phy { ++ status = "okay"; ++}; ++ ++&pcie0 { ++ ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; // sch ++ max-link-speed = <2>; ++ num-lanes = <2>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_clkreqn_cpm>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ pmic { ++ cpu_b_sleep: cpu-b-sleep { ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ gpu_sleep: gpu-sleep { ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ pmic_dvs2: pmic-dvs2 { ++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; // bsp ++ }; ++ }; ++ ++ sdio-pwrseq { ++ wifi_reg_on_h: wifi-reg-on-h { ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ wifi { ++ wifi_host_wake_l: wifi-host-wake-l { ++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ spi2 { ++ spi2_cs0: spi2-cs0 { ++ rockchip,pins = ++ <2 RK_PB4 2 &pcfg_pull_up>; ++ }; ++ }; ++ ++ display_pin:display-pin { ++ DC_pin: dc-pin { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ reset_pin: reset-pin { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ bt { ++ bt_enable_h: bt-enable-h { ++ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_host_wake_l: bt-host-wake-l { ++ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ bt_wake_l: bt-wake-l { ++ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ gmac { ++ vcc_phy_h: vcc-phy-h { ++ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ leds { ++ user_led2: user_led2 { ++ rockchip,pins = ++ <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ ir { ++ ir_int: ir-int { ++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ buttons { ++ power_key: power_key { ++ rockchip,pins = ++ <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++// TFT ++&pwm0 { ++ status = "okay"; ++}; ++ ++// FAN ++&pwm1 { ++ status = "okay"; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca1v8_s3>; ++ status = "okay"; ++}; ++ ++&sdio0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ clock-frequency = <50000000>; ++ disable-wp; ++ keep-power-in-suspend; ++ max-frequency = <50000000>; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; ++ sd-uhs-sdr104; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ interrupt-names = "host-wake"; ++ brcm,drive-strength = <5>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_host_wake_l>; ++ }; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; // bsp ++ clock-frequency = <150000000>; ++ disable-wp; ++ sd-uhs-sdr104; ++ max-frequency = <150000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; ++ vqmmc-supply = <&vcc_sd>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ mmc-hs400-1_8v; ++ mmc-hs400-enhanced-strobe; ++ keep-power-in-suspend; ++ non-removable; ++ status = "okay"; ++}; ++/* ++&spi1 { ++ status = "okay"; ++ ++ norflash: flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <50000000>; ++ }; ++}; ++*/ ++ ++&spi2 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_cs0>; ++ ++ st7735r@0 { ++ status = "okay"; ++ compatible = "sitronix,st7735r"; ++ reg = <0>; ++ rgb; ++ rotate = <270>; ++ width = <80>; ++ height = <160>; ++ fps = <30>; ++ buswidth = <8>; ++ backlight = <&backlight>; ++ dc-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; ++ reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; ++ led-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; ++ spi-max-frequency = <32000000>; ++ spi-cpol; ++ spi-cpha; ++ }; ++}; ++ ++&tcphy0 { ++ status = "okay"; ++}; ++ ++&tcphy1 { ++ status = "okay"; ++}; ++ ++&tsadc { ++ /* tshut mode 0:CRU 1:GPIO */ ++ rockchip,hw-tshut-mode = <1>; ++ /* tshut polarity 0:LOW 1:HIGH */ ++ rockchip,hw-tshut-polarity = <1>; ++ status = "okay"; ++}; ++ ++&u2phy0 { ++ status = "okay"; ++ ++ u2phy0_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy0_host: host-port { ++ status = "okay"; ++ }; ++}; ++ ++&u2phy1 { ++ status = "okay"; ++ ++ u2phy1_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy1_host: host-port { ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ clocks = <&rk808 1>; ++ clock-names = "lpo"; ++ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; ++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; ++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; ++ max-speed = <4000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; ++ vbat-supply = <&vcc3v3_sys>; ++ vddio-supply = <&vcc_1v8>; ++ }; ++}; ++ ++// Debug TTL ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usbdrd3_0 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_0 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&usbdrd3_1 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_1 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&vopb { ++ status = "okay"; ++}; ++ ++&vopb_mmu { ++ status = "okay"; ++}; ++ ++&vopl { ++ status = "okay"; ++}; ++ ++&vopl_mmu { ++ status = "okay"; ++}; ++ ++&iep_mmu { ++ status = "okay"; ++}; From 7c8cf0bf7b88fe3eea8ed8573afd4bfefec5c679 Mon Sep 17 00:00:00 2001 From: Lemon1151 Date: Sun, 30 Jun 2024 21:56:09 +0800 Subject: [PATCH 4/4] Integrating support for xiaobaonas boards into the rockchip64-6.9 kernel --- .../add-board-xiaobao-nas-dts.patch | 779 ++++++++++++++++++ 1 file changed, 779 insertions(+) create mode 100644 patch/kernel/archive/rockchip64-6.9/add-board-xiaobao-nas-dts.patch diff --git a/patch/kernel/archive/rockchip64-6.9/add-board-xiaobao-nas-dts.patch b/patch/kernel/archive/rockchip64-6.9/add-board-xiaobao-nas-dts.patch new file mode 100644 index 000000000000..a82ffbdd2b5c --- /dev/null +++ b/patch/kernel/archive/rockchip64-6.9/add-board-xiaobao-nas-dts.patch @@ -0,0 +1,779 @@ +diff --git a/arch/arm64/boot/dts/rockchip/rk3399-xiaobao-nas.dts b/arch/arm64/boot/dts/rockchip/rk3399-xiaobao-nas.dts +new file mode 100644 +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3399-xiaobao-nas.dts +@@ -0,0 +1,774 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++#include ++#include ++#include ++#include "rk3399.dtsi" ++#include "rk3399-opp.dtsi" ++ ++/ { ++ model = "Codinge Xiaobao NAS"; ++ compatible = "codinge,xiaobao-nas", "rockchip,rk3399"; ++ ++ aliases { ++ mmc0 = &sdmmc; ++ mmc1 = &sdhci; ++ mmc2 = &sdio0; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ clkin_gmac: external-gmac-clock { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "clkin_gmac"; ++ #clock-cells = <0>; ++ }; ++ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk808 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_enable_h>; ++ reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ vcc_dc: vcc-dc { ++ compatible = "regulator-fixed"; ++ regulator-name = "dc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ vcc_12v: vcc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_12v"; ++ regulator-always-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ }; ++ ++ vcc5v0_sys: vcc5v0-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ vcc1v8_s3: vcc1v8-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v8_s3"; ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc_1v8>; ++ }; ++ ++ vcc3v3_sys: vcc3v3-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ vcc5v0_host: vcc5v0-host-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_host_en>; ++ regulator-name = "vcc5v0_host"; ++ }; ++ ++ vcc_sd: vcc-sd { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sd"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc_sd_h>; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ vcc5v0_typec: vcc5v0-typec { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_typec_en>; ++ regulator-name = "vcc5v0_typec"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc_12v>; ++ }; ++ ++ vcc3v3_pcie: vcc3v3-pcie-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_pcie"; ++ enable-active-high; ++ gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_pwr_en>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ vcc_lan: vcc3v3-phy-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_lan"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ adc-keys { ++ compatible = "adc-keys"; ++ io-channels = <&saradc 1>; ++ io-channel-names = "buttons"; ++ keyup-threshold-microvolt = <1800000>; ++ poll-interval = <100>; ++ ++ recovery { ++ label = "Recovery"; ++ linux,code = <0x168>; ++ press-threshold-microvolt = <18000>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&leds_pins>; ++ ++ led1: system-led1 { ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; ++ label = "system_led1"; ++ retain-state-suspended; ++ default-state = "on"; ++ }; ++ ++ led2: system-led2 { ++ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>; ++ label = "system_led2"; ++ retain-state-suspended; ++ default-state = "off"; ++ }; ++ }; ++ ++ pwm-fan { ++ compatible = "pwm-fan"; ++ pwms = <&pwm1 0 50000 0>; ++ }; ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&emmc_phy { ++ status = "okay"; ++}; ++ ++&gmac { ++ assigned-clocks = <&cru SCLK_RMII_SRC>; ++ assigned-clock-parents = <&clkin_gmac>; ++ clock_in_out = "input"; ++ phy-supply = <&vcc_lan>; ++ phy-mode = "rgmii"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; ++ tx_delay = <0x28>; ++ rx_delay = <0x11>; ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ ddc-i2c-bus = <&i2c3>; ++ ddc-i2c-scl-high-time-ns = <9625>; ++ ddc-i2c-scl-low-time-ns = <10000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hdmi_cec>; ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ clock-frequency = <400000>; ++ i2c-scl-rising-time-ns = <168>; ++ i2c-scl-falling-time-ns = <4>; ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ vcc10-supply = <&vcc3v3_sys>; ++ vcc11-supply = <&vcc3v3_sys>; ++ vcc12-supply = <&vcc3v3_sys>; ++ vddio-supply = <&vcc_3v0>; ++ ++ regulators { ++ vdd_center: DCDC_REG1 { ++ regulator-name = "vdd_center"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_l: DCDC_REG2 { ++ regulator-name = "vdd_cpu_l"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG4 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc1v8_dvp: LDO_REG1 { ++ regulator-name = "vcc1v8_dvp"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcca_1v8: LDO_REG2 { ++ regulator-name = "vcca_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc1v8_pmupll: LDO_REG3 { ++ regulator-name = "vcc1v8_pmupll"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_sdio: LDO_REG4 { ++ regulator-name = "vcc_sdio"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcca3v0_codec: LDO_REG5 { ++ regulator-name = "vcca3v0_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc_1v5: LDO_REG6 { ++ regulator-name = "vcc_1v5"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1500000>; ++ }; ++ }; ++ ++ vcca1v8_codec: LDO_REG7 { ++ regulator-name = "vcca1v8_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_3v0: LDO_REG8 { ++ regulator-name = "vcc_3v0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc3v3_s3: SWITCH_REG1 { ++ regulator-name = "vcc3v3_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_s0: SWITCH_REG2 { ++ regulator-name = "vcc3v3_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++ ++ vdd_cpu_b: regulator@40 { ++ compatible = "silergy,syr827"; ++ reg = <0x40>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel1_pin>; ++ regulator-name = "vdd_cpu_b"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: regulator@41 { ++ compatible = "silergy,syr828"; ++ reg = <0x41>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel2_pin>; ++ regulator-name = "vdd_gpu"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ hym8563@51 { ++ compatible = "haoyu,hym8563"; ++ reg = <0x51>; ++ #clock-cells = <0>; ++ clock-frequency = <32768>; ++ clock-output-names = "xin32k"; ++ }; ++}; ++ ++&i2c3 { ++ i2c-scl-rising-time-ns = <450>; ++ i2c-scl-falling-time-ns = <15>; ++ status = "okay"; ++}; ++ ++&i2c4 { ++ clock-frequency = <400000>; ++ i2c-scl-rising-time-ns = <160>; ++ i2c-scl-falling-time-ns = <30>; ++ status = "okay"; ++ ++ typec-portc@22 { ++ compatible = "fcs,fusb302"; ++ reg = <0x22>; ++ interrupt-parent = <&gpio1>; ++ interrupts = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&fusb0_int>; ++ vbus-supply = <&vcc5v0_typec>; ++ }; ++}; ++ ++&i2s0 { ++ rockchip,capture-channels = <8>; ++ rockchip,playback-channels = <8>; ++ status = "okay"; ++}; ++ ++&i2s1 { ++ rockchip,capture-channels = <2>; ++ rockchip,playback-channels = <2>; ++ status = "okay"; ++}; ++ ++&i2s2 { ++ status = "okay"; ++}; ++ ++&io_domains { ++ status = "okay"; ++ ++ bt656-supply = <&vcc_3v0>; ++ audio-supply = <&vcca1v8_codec>; ++ sdmmc-supply = <&vcc_sdio>; ++ gpio1830-supply = <&vcc_3v0>; ++}; ++ ++&pcie_phy { ++ status = "okay"; ++ drive-impedance-ohm = <50>; ++}; ++ ++&pcie0 { ++ ep-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; ++ num-lanes = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_clkreqnb_cpm &fn8274_en_h>; ++ status = "okay"; ++}; ++ ++&pmu_io_domains { ++ status = "okay"; ++ ++ pmu1830-supply = <&vcc_3v0>; ++}; ++ ++&pinctrl { ++ pcie { ++ fn8274_en_h: fn8274-en-h { ++ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>, ++ <4 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>, ++ <1 RK_PC7 RK_FUNC_GPIO &pcfg_output_high>; ++ }; ++ ++ pcie_pwr_en: pcie-pwr-en { ++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ vsel1_pin: vsel1-pin { ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ vsel2_pin: vsel2-pin { ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ usb2 { ++ vcc5v0_host_en: vcc5v0-host-en { ++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ vcc5v0_typec_en: vcc5v0-typec-en { ++ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>; ++ }; ++ }; ++ ++ vcc_sd { ++ vcc_sd_h: vcc-sd-h { ++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ fusb30x { ++ fusb0_int: fusb0-int { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ sdio-pwrseq { ++ wifi_enable_h: wifi-enable-h { ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ leds { ++ leds_pins: leds-pins { ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, ++ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++&pwm1 { ++ status = "okay"; ++}; ++ ++&saradc { ++ status = "okay"; ++}; ++ ++&sdio0 { ++ bus-width = <4>; ++ clock-frequency = <50000000>; ++ cap-sdio-irq; ++ cap-sd-highspeed; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ num-slots = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; ++ sd-uhs-sdr104; ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ max-frequency = <150000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; ++ vmmc-supply = <&vcc_sd>; ++ vqmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ mmc-hs400-1_8v; ++ mmc-hs400-enhanced-strobe; ++ non-removable; ++ status = "okay"; ++}; ++ ++&spi1 { ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0x00>; ++ spi-max-frequency = <10000000>; ++ }; ++}; ++ ++&tcphy0 { ++ status = "okay"; ++}; ++ ++&tcphy1 { ++ status = "okay"; ++}; ++ ++&tsadc { ++ status = "okay"; ++ ++ /* tshut mode 0:CRU 1:GPIO */ ++ rockchip,hw-tshut-mode = <1>; ++ /* tshut polarity 0:LOW 1:HIGH */ ++ rockchip,hw-tshut-polarity = <1>; ++}; ++ ++&u2phy0 { ++ status = "okay"; ++}; ++ ++&u2phy0_otg { ++ status = "okay"; ++}; ++ ++&u2phy0_host { ++ phy-supply = <&vcc5v0_host>; ++ status = "okay"; ++}; ++ ++&u2phy1 { ++ status = "okay"; ++}; ++ ++&u2phy1_otg { ++ status = "okay"; ++}; ++ ++&u2phy1_host { ++ phy-supply = <&vcc5v0_host>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usbdrd3_0 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_0 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&usbdrd3_1 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_1 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&vopb { ++ status = "okay"; ++}; ++ ++&vopb_mmu { ++ status = "okay"; ++}; ++ ++&vopl { ++ status = "okay"; ++}; ++ ++&vopl_mmu { ++ status = "okay"; ++};