Skip to content

Latest commit

 

History

History
248 lines (178 loc) · 8.3 KB

README.md

File metadata and controls

248 lines (178 loc) · 8.3 KB

version.sh

GitHub Workflow

version.sh is a script to output "normalized" version strings of projects tracked with Git, e.g. for usage during software builds. Specifically, it aims to produce the same strings whether you are working from a cloned repository or a downloaded archive of it.

tl;dr:

[install, see below ...]
$ git describe
1.0-1-g904b097
$ bash version.sh describe
1.0-1-g904b097
$ git archive HEAD | tar -x --to-stdout version.sh | bash /dev/stdin describe
1.0-1-g904b097

what's the problem?

The problem with embedding consistent versions from a single "source of truth" is described a little further in this blog post. In short: you don't have the .git directory in downloaded archives and therefore cannot retrieve any version information with Git. Furthermore you might not want to have Git as a requirement when building your software if all you really need is a small makefile or a single go build command, etc. But then you need a seperate workflow for updating e.g. a VERSION file and need to track that in your repository.

This can be solved by adding an entry like VERSION export-subst to the project's .gitattributes file and using $Format:__$ strings that will be substituted upon archive creation. However, that simple approach only works when you're working from an extracted archive and the possible format-strings are rather limited. Git has recently learned a new trick and you can now use %(describe) placeholders, which mimic git describe very well, even when the exported archive is not exactly a tagged release.

The version.sh script attempts to combine both worlds:

  • If working in a cloned repository, those format-strings will not be substituted but the .git directory will exist and normal Git commands can be used.

  • If working on an extracted archive, which was created with git archive (e.g. GitHub source downloads), the format-strings will have been substituted and the script will attempt to parse those – no git required.

installation

Copy version.sh to your repository and add the following line to your .gitattributes file, creating it if it does not exist:

version.sh export-subst

Add and commit both files and try running sh version.sh.

Scripted installation for copy-pasting:

curl -LO https://github.com/ansemjo/version.sh/raw/main/version.sh
echo 'version.sh export-subst' >> .gitattributes
git add version.sh .gitattributes && git commit -m 'use ansemjo/version.sh'

I tried to stay POSIX compliant and portable with version.sh, so you should be able to execute the script with any compliant shell implementation, given that some basic commands like sed, test and printf are available. This also means that build tools like make or Python's setuptools should trivially be able to use its output during builds. The ci workflow currently tests bash, dash and ksh on Linux and OSX.

A greatly simplified, less configurable, but modern implementation is found in version-simple.sh. It requires bash and a Git version of at least 2.32.0 because it uses the %(describe) string mentioned above. Note that this includes any server-side binaries as well! I.e. check if your repository host supports this! As of 2021-11-23 I have verified that GitHub does support it.

usage

The script optionally takes one argument: describe, commit, json or env.

$ sh version.sh 
904b09789961440a2703fad36d9ddfe6533f9928 1.0-1-g904b097

$ sh version.sh describe
1.0-1-g904b097

$ sh version.sh commit
904b09789961440a2703fad36d9ddfe6533f9928

$ sh version.sh json
{"version":"1.0-1-g904b097","commit":"904b09789961440a2703fad36d9ddfe6533f9928"}

$ sh version.sh env
VERSION='1.0-1-g904b097'
COMMIT='904b09789961440a2703fad36d9ddfe6533f9928'

You can configure the version string with a few environment variables:

env default description
REVISION_SEPARATOR - separator for the "commits since tag" counter
HASH_SEPARATOR -g separator before the commit hash at the end
DIRTY_MARKER -dirty added when working in a dirty clone
ALWAYS_LONG_VERSION y always format a long string, even if exactly on a tagged commit (y/n)

Note: previous versions contained a typo in the variable names, so they have changed!

For example, a slightly customized version format might look like this:

$ export REVISION_SEPARATOR=" rev"
$ export HASH_SEPARATOR=" #"
$ sh version.sh describe
1.0 rev1 #904b097

Some common usage examples with a few build tools follow below.

edge cases

With a modern Git (see above) the script should almost always produce identical output from cloned repositories and extracted archives, which will be similar to git describe --always --long. However, most Gits today will have a few edge cases, where different strings are produced because the information that can be gained from the format-strings is limited:

where condition effect
archive not exactly a tagged release, but is a tip of a branch, e.g. main.zip $REFS will contain something like HEAD -> main and version will be formatted like main-g904b097
archive not exactly a tagged release, nor a tip of a branch⁺ no information available at all, version will the short commit hash 904b097
cloned no annotated tags in history, detached HEAD no information available at all, version will the short commit hash 904b097
cloned no annotated tags in history, branch tip version will be formatted like a branch archive: main-g904b097
cloned modified files present appended dirty marker after the commit hash: 1.0-1-g904b097-dirty

⁺) Note that in an extracted archive you cannot distinguish whether it's just not exactly a tagged release or there are no tags at all, so the output will actually be identical to a detached HEAD with not tags at all.

To summarize, only annotated tags / releases are absolutely guaranteed to be consistent between the cloned repository and a downloaded archive.

build tool examples

Python with setuptools

#!/usr/bin/env python

import os
from subprocess import check_output
from setuptools import setup, find_packages

os.environ["REVISION_SEPARATOR"] = ".post" # PEP 440 compatability
os.environ["HASH_SEPARATOR"] = " " # for splitting
cmd = check_output(["sh", "version.sh", "describe"]).strip() # => b'1.0.post1 g904b097'
version = cmd.split()[0].decode() # => '1.0.post1'

setup(
    name="mypkg",
    version=version,
    packages=find_packages(),
    ...
)

Go

package main

import "fmt"

var version string

func main() {
  fmt.Println("hello version", version)
}
go run -ldflags "-X main.version=$(sh version.sh describe)" hello.go

JavaScript

This is a very terse example of a TypeScript project off the top of my head, where yarn build is used to compile to a JavaScript dist.

{
  "name": "myapp",
  "scripts": {
    "prebuild": "printf 'export const version = %s;\\n' \"$(sh version.sh json)\" > app/version.ts",
    "build": "tsc",
    ...
  }
}

C and Makefile

#include <stdio.h>

int main() {
  printf("My version: %s\ncommit: %s\n", VERSION, COMMIT);
  return(0);
}
VERSION := $(shell sh version.sh describe)
COMMIT  := $(shell sh version.sh commit)
CFLAGS  := $(CFLAGS) -DVERSION="\"$(VERSION)\"" -DCOMMIT="\"$(COMMIT)\""

hello: hello.c
	gcc $(CFLAGS) $< -o $@

autotools

...
AC_INIT([myprogram], [m4_esyscmd_s([sh version.sh describe])])
AC_CONFIG_HEADERS([config.h])
AC_DEFINE_UNQUOTED([COMMIT], "`sh version.sh commit`", "Git commit from which we build")
...

Running autoreconf && ./configure will add to config.h:

...

/* Version number of package */
#define VERSION "1.0-1-g904b097"

/* "Git commit from which we build" */
#define COMMIT "904b09789961440a2703fad36d9ddfe6533f9928"

...