Skip to content

Latest commit

 

History

History
97 lines (90 loc) · 4.13 KB

FEATURES.md

File metadata and controls

97 lines (90 loc) · 4.13 KB

Marlin 2.1.x [MARLIN-E3S1PROFORK-BYTT]

This firmware is open source and based Marlin Firmware and the Creality Ender 3 S1 PRO source code.

Additional changes and additions were made by Thomas Toka.

Features Ender 3 S1 Pro:

  • bed size (235mmx235mm)
  • printing height 270
  • correct homeing offsets
  • correct nozzle to probe offsets
  • z-offset set to 0.0 in order calibrate for your printer
  • babystepping while printing fixed and set to 0.01mm steps
  • babystepping on leveling page fixed and set to 0.01mm steps
  • linear advance set to 0.05
  • input shaping activated and set to x 40hz and y 40hz.
  • increased buffers for faster octoprint and sd communication
  • increased feedrates in reasonable borders for faster printing
  • increased min_segmenttime for better quality
  • unified bedleveling with a 5x5, 7x7, 10x10 mesh
  • bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
  • probing margin bumped to 45mm to get a square mesh
  • no preheat before leveling, set what you want for that before leveling.
  • pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
  • fixed manual bed leveling point 1 from x=117 to x=117.5 and y=117 to y=117.5
  • fixed filament runount sensor resume not functional
  • fixed sd print pause resume not functional
  • fixed prusa sclicer M600 functionality
  • fixed octoprint print progress
  • laser functionality enabled
  • included relevant marlin upstream fixes
  • firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
  • firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
  • firmware complete rebased on Marlin 2.1.x-bugfix
  • M117 set lcd message supported
  • M851 and M290 changes force update of zoffset on screen
  • z-offset to host notification
  • restore bedleveling after G28
  • M48 probe repeatability test
  • extruder minimum temperature lowered to 170C
  • heatbreak fan extruder minimum temperature set to 80C
  • bltouch high speed mode enabled on 5x5 and 7x7 builds
  • G26 mesh validation
  • G12 clean the nozzle
  • include adc values when reporting temperature
  • emergency parser
  • host action commands
  • host prompt support enabled
  • M486 cancel objects

Features Ender 3 S1 Plus:

  • bed size (315mmx310mm)
  • printing height 300
  • correct homeing offsets
  • correct nozzle to probe offsets
  • z-offset set to 0.0 in order calibrate for your printer
  • babystepping while printing fixed and set to 0.01mm steps
  • babystepping on leveling page fixed and set to 0.01mm steps
  • linear advance set to 0.05
  • input shaping activated and set to x 40hz and y 40hz.
  • increased buffers for faster octoprint and sd communication
  • increased feedrates in reasonable borders for faster printing
  • increased min_segmenttime for better quality
  • unified bedleveling with a 5x5, 7x7, 10x10 mesh
  • bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
  • probing margin bumped to 55mm to get a square mesh
  • no preheat before leveling, set what you want for that before leveling.
  • pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
  • fixed manual bed leveling point 1 from x=157 to x=157.5
  • fixed filament runount sensor resume not functional
  • fixed sd print pause resume not functional
  • fixed prusa sclicer M600 functionality
  • fixed octoprint print progress
  • laser functionality enabled
  • included relevant marlin upstream fixes
  • firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
  • firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
  • firmware complete rebased on Marlin 2.1.x-bugfix
  • M117 set lcd message supported
  • M851 and M290 changes force update of zoffset on screen
  • z-offset to host notification
  • restore bedleveling after G28
  • M48 probe repeatability test
  • extruder minimum temperature lowered to 170C
  • heatbreak fan extruder minimum temperature set to 80C
  • bltouch high speed mode enabled on 5x5 and 7x7 builds
  • G26 mesh validation
  • G12 clean the nozzle
  • include adc values when reporting temperature
  • emergency parser
  • auto report position
  • host action commands
  • host prompt support enabled
  • M486 cancel objects