We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Allowing the z height location to be modified after using the probing widget would greatly improve workflow.
After probing for the Z-height, Generally the next step while working with wood is to put the dust boot back on.
With the current configuration, that requires manually raising the z up enough to fit the boot back on.
My recommendation would be to either allow a custom height to be set after probe, or just raise it back up near home after successful reading.
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Allowing the z height location to be modified after using the probing widget would greatly improve workflow.
After probing for the Z-height, Generally the next step while working with wood is to put the dust boot back on.
With the current configuration, that requires manually raising the z up enough to fit the boot back on.
My recommendation would be to either allow a custom height to be set after probe, or just raise it back up near home after successful reading.
The text was updated successfully, but these errors were encountered: