Chips only reading initial band

[MWalker1994]

I'm using a pre-built stereo breakout board and the MSGEQ7_Serial example, and no matter what I do, all the channels seem to read high when tested with a 63Hz sine wave and low when tested with anything over 100 (using Serial.print(MSGEQ7.get(4)); results in 0 at 1KHz and a decent response at 63Hz). I apologise in advance if this is a code error or hardware error on my part, but any help is appreciated.

[NicoHood]

Did you manage to solve the issue? That sounds like a broken chip.