BGP ipv6 not installing routes to kernel

[PeterGrace]

Hi and thanks in advance for your thoughts!

I have two FRR installations, one at a colocation and one at my home. I'm trying to route part of my ipv6 allocation to the house to prevent having to renumber certain things when my provider gives me a new dynamic ipv6.

I have BGP mostly working, except that I can't get the routes to actually install in the routing table. Here's the output of received-routes:

# sh bgp ipv6 neighbors 2602:814:400f:f2f0::1 received-routes
BGP table version is 1, local router ID is 10.174.254.1, vrf id 0
Default local pref 100, local AS 65174
Status codes:  s suppressed, d damped, h history, * valid, > best, = multipath,
               i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes:  i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> ::/0             2602:814:400f:f2f0::1
                                                           0 18470 i
*> 2602:814:4000::/44
                    2602:814:400f:f2f0::1
                                             0             0 18470 i

Total number of prefixes 2

And then when I check just the routes:

pfsense# sh bgp ipv6 neighbors 2602:814:400f:f2f0::1 routes
BGP table version is 1, local router ID is 10.174.254.1, vrf id 0
Default local pref 100, local AS 65174
Status codes:  s suppressed, d damped, h history, * valid, > best, = multipath,
               i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes:  i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
   ::/0             fe80::fe73:9805                        0 18470 i
   2602:814:4000::/44
                    fe80::fe73:9805          0             0 18470 i

I'm wondering if whether the fact that FRR is translating the next hop to a link-local address has something to do with this?

I've configured a route-map (router config on home-side) with prefer-global but it doesn't appear to affect it:

# pfsense (home) config
router bgp 65174
 bgp router-id 10.174.254.1
 bgp log-neighbor-changes
 no bgp ebgp-requires-policy
 no bgp network import-check
 neighbor 2602:814:400f:f1f0::1 remote-as 18470
 neighbor 2602:814:400f:f1f0::1 description nep-nyc1
 neighbor 2602:814:400f:f1f0::1 solo
 neighbor 2602:814:400f:f1f0::1 disable-connected-check
 neighbor 2602:814:400f:f2f0::1 remote-as 18470
 neighbor 2602:814:400f:f2f0::1 description vultr-nyc1
 neighbor 2602:814:400f:f2f0::1 solo
 neighbor 2602:814:400f:f2f0::1 disable-connected-check
 !
 address-family ipv4 unicast
  redistribute connected
  redistribute static
  no neighbor 2602:814:400f:f1f0::1 send-community
  neighbor 2602:814:400f:f1f0::1 prefix-list grace-hollow-v6 out
  
 exit-address-family
 !
 address-family ipv6 unicast
  network 2602:814:4000::/48
  neighbor 2602:814:400f:f1f0::1 activate
  no neighbor 2602:814:400f:f1f0::1 send-community
  neighbor 2602:814:400f:f1f0::1 soft-reconfiguration inbound
  neighbor 2602:814:400f:f1f0::1 prefix-list grace-hollow-v6 out
  neighbor 2602:814:400f:f1f0::1 route-map NEPTUNE_DEFAULT_IN in
  neighbor 2602:814:400f:f2f0::1 activate
  no neighbor 2602:814:400f:f2f0::1 send-community
  neighbor 2602:814:400f:f2f0::1 soft-reconfiguration inbound
  neighbor 2602:814:400f:f2f0::1 prefix-list allv6 in
  neighbor 2602:814:400f:f2f0::1 prefix-list grace-hollow-v6 out
 exit-address-family
!
ip prefix-list k8snet seq 10 permit 10.174.0.0/16 ge 16 le 32
ip prefix-list outbound seq 10 permit 10.174.0.0/16 ge 17 le 32
ip prefix-list allv4 seq 100 permit 0.0.0.0/0 le 32
!
ipv6 prefix-list grace-hollow-v6 seq 10 permit 2602:814:4000::/48 ge 48 le 128
ipv6 prefix-list allv6 seq 100 permit ::/0 le 128
ipv6 prefix-list onlydefaultv6 seq 100 permit ::/0 le 0
!
route-map tablemap permit 10
 match ipv6 address onlydefaultv6
!
route-map DEFAULT_V6_IN permit 10
 match ipv6 address prefix-list onlydefaultv6
 set ipv6 next-hop prefer-global
!
route-map NEPTUNE_DEFAULT_IN permit 10
 match ipv6 address prefix-list allv6
 set ipv6 next-hop global 2602:814:400f:f1f0::1
 set ipv6 next-hop prefer-global
!
line vty
!
end

And for good measure, here's the router config for 2602:814:400f:f1f0::1

# nep-nyc1 (config at vps)
router bgp 18470
 no bgp ebgp-requires-policy
 no bgp network import-check
 neighbor 172.82.22.129 remote-as 21700
 neighbor 172.82.22.129 description 'Neptune Networks v4'
 neighbor 172.82.22.129 solo
 neighbor 2602:814:400f:f1f0::2 remote-as 65174
 neighbor 2602:814:400f:f1f0::2 description Grace Hollow
 neighbor 2602:814:400f:f1f0::2 solo
 neighbor 2602:814:400f:f1f0::2 graceful-restart
 neighbor 2602:fe2e:4:80::1 remote-as 21700
 neighbor 2602:fe2e:4:80::1 description 'Neptune Networks v6'
 neighbor 2602:fe2e:4:80::1 solo
 neighbor 2602:fe2e:4:80::1 ebgp-multihop 2
 neighbor 2602:fe2e:4:80::1 graceful-restart
 !
 address-family ipv4 unicast
  no neighbor 2602:fe2e:4:80::1 activate
 exit-address-family
 !
 address-family ipv6 unicast
  network 2602:814:4000::/44
  neighbor 2602:814:400f:f1f0::2 activate
  neighbor 2602:814:400f:f1f0::2 default-originate route-map sent-default-map-v6
  neighbor 2602:814:400f:f1f0::2 prefix-list grace-hollow in
  neighbor 2602:814:400f:f1f0::2 prefix-list defaultv6 out
  neighbor 2602:fe2e:4:80::1 activate
 exit-address-family
exit
!
ipv6 prefix-list gl-gfaa-01 seq 10 permit 2602:814:4000::/44 ge 44 le 128
ipv6 prefix-list grace-hollow seq 10 permit 2602:814:4000::/48 ge 48 le 128
ipv6 prefix-list allv6 seq 100 permit ::/0 le 128
ipv6 prefix-list defaultv6 seq 100 permit ::/0 le 0
!
route-map sent-default-map-v6 permit 10
 set ipv6 next-hop global 2602:814:400f:f1f0::1
exit
!
end

My main question I'm looking to answer: Why are my ipv6 routes not entering into the routing table? I am also running bgp ipv4 on the 'home node' and it is properly installing routes to the pfsense kernel so I must have something mucked up on the ipv6 config side.

Thanks for any help you can provide!

[ton31337]

Please show show bgp 2602:814:4000::/44, show ipv6 route 2602:814:4000::/44.

[PeterGrace]

Please show show bgp 2602:814:4000::/44, show ipv6 route 2602:814:4000::/44.

Thanks for responding @ton31337 , I wound up having to change my network layout today and that makes this question no longer relevant. I appreciate your response!