T5 and T6 Trim Switches Do Not Work in Companion 2.10

[FrqFlyer]

Trying to use T5 and T6 switches as toggle switches. I use the following steps.

1. Disable T5 and T6 Trim switches in Flight Mode 0.
2. Create a logical switch with Sticky, i,e., Sticky, T5+, T5-. Call it L07
3. Add a mix channel to test T5. In the simulator in I cannot get L07.

On the Transmitter this logic works great. This Youtube video illustrates it really well on the transmitter: Manage your #OpenTX trims like a PRO!. https://www.youtube.com/watch?v=YuibLknMsx4

[pfeerick]

Can't reproduce this with Companion 2.10 Simulator (either when created in Companion first, or configured entirely in Simulator)... are you looking down the source list far enough?

[FrqFlyer]

Thank you for your quick response. I appreciate it. I cannot make it work in Companion 2.10. However, it works great on the transmitter. I'm using it for thrust reverse on the eFlite A10 -- works great on the plane. I even set it up on the transmitter. I made sure it worked correctly on the plane. Then I read that model setup into Companion. Still doesn't work. Looks like a bug or something the developers haven't worked on yet. Regards, Gary Armstrong <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

…

On Sun, Jun 9, 2024 at 6:47 PM Peter Feerick ***@***.***> wrote: Can't reproduce this with Companion 2.10 Simulator... are you looking down the source list far enough? image.png (view on web) <https://github.com/EdgeTX/edgetx/assets/5500713/393ee7f1-09fa-4eee-8271-53772ec0da31> image.png (view on web) <https://github.com/EdgeTX/edgetx/assets/5500713/03284556-145f-4ed2-8beb-2cb8a671091b> image.png (view on web) <https://github.com/EdgeTX/edgetx/assets/5500713/180aa2a4-5f97-421f-9de7-af185ba67903> image.png (view on web) <https://github.com/EdgeTX/edgetx/assets/5500713/e059382a-f2b5-4c9e-81fd-14ad1ec9aae3> image.png (view on web) <https://github.com/EdgeTX/edgetx/assets/5500713/9912cc95-4f05-42d4-92a0-66c287d2b8e1> — Reply to this email directly, view it on GitHub <#5143 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BJB26TXXIWZE3EY7OK2SXDLZGTLPXAVCNFSM6AAAAABJBCKHYSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOMRRGU2TM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[pfeerick]

Can you share one of the models you are trying to get working - you will need to upload it on github, not via email attachment (look for the attach paperclip just above the input textbox) - as all those screenshots were from Companion 2.10... so clearly it's not a simple just doesn't work at all bug 🤣 It is entirely possible that Companion isn't reading the settings in properly.

[pfeerick]

I.e. if I just try from scratch in companion, and check it in simulator (not taking into account L07, etc this time), this works:
https://github.com/EdgeTX/edgetx/assets/5500713/e3f1c613-1ddd-45be-a3bd-b39be5b79196

[FrqFlyer]

Peter, thanks for your assistance. I my setup for my eflite A10 and the T5 switch works great. No issues at all. However when I connect my transmitter to Companion and load the models into Companion, the T5 simply doesn’t work. I just wanted the developers to know that there is a possible bug in Companion. The link I provided to FPV University video is exactly what I’m using. Again, on the TX and the model, it works perfectly. Regards, Gary

…

On Sun, Jun 9, 2024 at 8:45 PM Peter Feerick ***@***.***> wrote: Can you share one of the models you are trying to get working - you will need to upload it on github, not via email attachment (look for the attach paperclip just above the input textbox) - as all those screenshots were *from* Companion 2.10... so clearly it's not a simple *just doesn't work at all* bug 🤣 It is entirely possible that Companion isn't reading the settings in properly. — Reply to this email directly, view it on GitHub <#5143 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BJB26TUV5SHXGCJZFJJBELTZGTZLLAVCNFSM6AAAAABJBCKHYSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOMRRHA2TS> . You are receiving this because you authored the thread.Message ID: ***@***.***>