Jumper T-Pro V2 TPROV2-PRODUCTION-10-5-23.zip as firmware

[buemonet]

Hallo, after install TPROV2-PRODUCTION-10-5-23.zip on my Jumper T-Pro V2 the display was right.

If I start EdgeTX on the Jumper T-Pro V2 all seems okay, but if I open the Channel Monitor and I change the sticks for CH1, CH2, CH3 and CH4 nothing changed on the display between +100 and -100.

The next problem ist that my Deltang receiver RX43D-1 V510 did not bind with the procedure in Setup.

What went wrong and what you have as solution?

Thank you for help.

[pfeerick]

Have you done a stick calibration yet? SYS -> HARDWARE -> Calibration

As far as the binding, I have no idea as I don't know what protocol the "Deltang receiver RX43D-1 V510" speaks, or if you have the correct version of the TProV2... 4IN1 MPM?

[drcpedro]

SYS => HARDWARE => Calibration), I can't find that option in the menu Could you help me

[pfeerick]

Sometimes a video is better ;) Long press on the first button for SYS. Since you've got a TPro V2, also center and move the two pots at the top when instructed to center and move the sticks.

tpro_calibration.mp4

[drcpedro]

Muchas gracias amigo, ya he conseguido que todo corra bien.