Simple project using the 8 Cu LEDs to count up to 28 and display binary values.
This contains all of the code for the binary_counter module, which has a clk input and led output to the Cu LEDs. The counter reg is used as an internal counter to slow down the 100 MHz clock input.
This contains all of the code to test the binary_counter module, simulating the 100 MHz clock step and recording the value of the led output. This simulation produces a VCD (Value Change Dump) file for the first 0.1 second of operation.
This is a generic PCF (Physical Constraints File) file containing the USB outputs, the Cu LED outputs, clock input, and reset button input pin mappings for the Alchitry Cu.
This a generic Makefile designed around providing Make targets that each accomplish part of the full toolchain. The main commands to use are test to handle a simulation check workflow (clean, lint, and simulate) and check to handle a hardware check workflow (clean, lint, synthesize, place, time). It makes use of Scansion to display the simulation results. Once both of those checks pass, make using the all target does both checks and also run upload.
